08UrbanRunner
New member
Hello, I have looked at Advance Auto Parts and they referred me to Exhaust Pro or Jiffy Lube. There they gave me some suggestions. I know-of Borla, Flowmaster, Gibson, and some others. However my thing is that I want a beefy-deep sound but I don't want a buzz or annoying noise inside, or least as possible. I looked up Flowmaster(s) website and they had the Series 50 which seemed to be like the ideal 4runner setup. Obviously the Series 50 SUV would seem to work but does anyone know if the Series 50 DH would work on a 4runner?? Also how much work/cost would it be (roughly, estimate, guess) to have double exhaust pipes (one one either side out the back) ?
Thanks so much, I'll try to post some pics but this is only my first post. Thanks again!
Also I talked with Trail Blazers/Exhaust Pro:
Would need to know length and width of muffler.
Would also need to know orientation. Offset/Centered inlet and outlet
so can someone help?
Haha I measured the pipes from standard muffler to the exhaust and diameter was around 8in so i devided by pi and got 2.50. So I'm guessing that would help but any other suggestions?
Also do Borla(s) sound good on only V8(s) or would they sound alright on V6????
Thanks so much, I'll try to post some pics but this is only my first post. Thanks again!
Also I talked with Trail Blazers/Exhaust Pro:
Would need to know length and width of muffler.
Would also need to know orientation. Offset/Centered inlet and outlet
so can someone help?
Haha I measured the pipes from standard muffler to the exhaust and diameter was around 8in so i devided by pi and got 2.50. So I'm guessing that would help but any other suggestions?
Also do Borla(s) sound good on only V8(s) or would they sound alright on V6????
Last edited: