Let's assume he found a solution, since he posted this in 2014.
I figured I'd revive an old thread than start a new one.
I picked up a 2021 TRD ORP this week and was curious how stiff the springs were in the 6112 kit.
Let's assume he found a solution, since he posted this in 2014.
I figured I'd revive an old thread than start a new one.
I picked up a 2021 TRD ORP this week and was curious how stiff the springs were in the 6112 kit.
I have 6112's up front set at the roughly equivalent stock height - there may be less than an inch of "lift" from them in my application.
Overall I feel the truck is more confident in braking with less nose dive. Sure, some is still present under heavy braking, however it's substantially better than it was stock.
It's a plus for me, but the ride is more firm now as a result of the Bilstein's front and rear. I find it a good compromise in terms of handling improvement vs ride quality change.
Same issue on my 17 SR5. Replaced with Bilstein 6112's in front and 5160's in the rear. A little bit better but my family still hates riding in it. 2 of 3 kids get car sick in this thing. Cool 4x4 but not all that practical for daily driver or highway.
Same issue on my 17 SR5. Replaced with Bilstein 6112's in front and 5160's in the rear. A little bit better but my family still hates riding in it. 2 of 3 kids get car sick in this thing. Cool 4x4 but not all that practical for daily driver or highway.
if 2 of 3 kids get sick and its due to nose dive.. its a driver issue..