RedSled
New member
Correct me if I’m wrong, but those look like the 16” 01-02 Sport Edition wheels. Are you sure you loaded the correct photo?
I have a set just like that in my garage, they were on my 2002 Sport, they are 16”.
Correct me if I’m wrong, but those look like the 16” 01-02 Sport Edition wheels. Are you sure you loaded the correct photo?
Can you explain this further? Will I run into issues due to a possible slightly different bore on non-Limited 5th gen wheels on my 3rd gen? Will I need new lug nuts?
I've seen several pictures of people mounting 5th gen TRD Offroad wheels to 3rd gens. That makes me think it's easily compatible, everything considered.
I put some 3rd Gen Tacoma TRD Sport rims on my stock 3rd Gen 4Runner without spacers or mods. No problems with fit, I have not experienced any rubbing. I have them posted on another T4R thread.
![]()
Untitled by 99blkx, on Flickr
Here is my 1998 SR5. Bone stock with Landcruiser wheels painted metallic Bronze.
Super old thread but why not... got these for a deal. Wish the tires were bigger.
Untitled by 99blkx, on Flickr
17x7 5th gen wheels - $150
265/65r17 Goodyear Duratracs - $350 (including a brand new 5th tire)
Not bad for $560 after mount and balance. I did buy new lug nuts but that was a want, not a need. Still trying to pick up a 5th wheel cheap for a spare.
Those are OEM wheels for a 5th gen SR5 4Runner. I got a set a couple years ago off facebook marketplace for $100 without tires/sensors/valve stems. They've gone up in price quite a bit since then. I usually see them for around $300 in my area for a set of wheels only.Where did you get those wheels? That is one hell of a price for a set of wheels!
anyone in here use the 6-lug TRD Rock Warriors? pics please. Thanks
Those are OEM wheels for a 5th gen SR5 4Runner. I got a set a couple years ago off facebook marketplace for $100 without tires/sensors/valve stems. They've gone up in price quite a bit since then. I usually see them for around $300 in my area for a set of wheels only.
Would also like pics. I had them on my 2nd gen taco when I had it and I really liked them, they were a PITA to clean though because of the “rock ring”
Sent from my iPhone using Tapatalk
did the RW wheels fit onto the hub of the Taco? Does the Taco hub have a lip like the one on the 4Runner?
Those are OEM wheels for a 5th gen SR5 4Runner. I got a set a couple years ago off facebook marketplace for $100 without tires/sensors/valve stems. They've gone up in price quite a bit since then. I usually see them for around $300 in my area for a set of wheels only.
Those are OEM wheels for a 5th gen SR5 4Runner. I got a set a couple years ago off facebook marketplace for $100 without tires/sensors/valve stems. They've gone up in price quite a bit since then. I usually see them for around $300 in my area for a set of wheels only.