OME883 and CV angle

[my92t4r]

anyone else having a rumbling noise w/steering wheel vibrations @ 55+ mph after a 2.5+" left up front? It only comes @ 55+ mph and slowly diminishes after 70mph with a slight steering wheel vibrations.

Brand new Duratrac all 4 and balanced. I'm thinking alignment, but i am tired of paying $89 for an alignment. If i do it, it will be my 4th one this year already. **** Modding is expensive.

Bilsteins 5100 on 3rd perch
OME 883
New OE LBJ w/bolts both side
New inner/outer Tie rods
Newish swaybar links
Steering rack bushing with poly
Steering rack guide

 

[Hollis]

I would your balancing on the tires again. Some of these tire places take a couple times to get it right. I eventually paid Toyota $50 to correctly balance them.

On the Alignment - If you have a Firestone nearby, get a lifetime alignment for around $180. I have had mine realigned 3 times in 3 years due to swapping parts out, new tires, etc...

 

[my92t4r]

i fixed it, it was too high, i dropped it to the "0" bottom perch and my cv angles are happy again and so is the rumbling noise.

Hope this help someone in the future, because i know you guys are going to swap out your front lift for OME 883 soon, you'll see and when you do please refer back to this thread.