Part a 2000 LTD 4WD and 1999 4WD SR5 - Mid Atlantic (NC)

[layifioren]

Floor Mats

im after F & R oak floor mats. if you have them, are they in okay/decent condition?

I have them. I will check on the condition tomorrow. And sorry for the late response; for some reason, I have not been getting notifications.

 

[layifioren]

Corner Lights

corner marker lights
shipped to 95124

[MENTION=141245]layifioren[/MENTION]

Sorry, I already sold all the OEM ones I have in good condition.

 

[408mustang]

Looking for a 99 model wood grain center bezel. Goes around the radio and HVAC....clock has to be in the center.
Thanks

 

[layifioren]

Looking for a 99 model wood grain center bezel. Goes around the radio and HVAC....clock has to be in the center.

Thanks

Sorry, I do not have any woodgrain bezel left.

Sent from my SM-G930V using Tapatalk

 

[layifioren]

im after F & R oak floor mats. if you have them, are they in okay/decent condition?

I checked and I only have the rear ones. Seems the front ones moved on me.

Sent from my SM-G930V using Tapatalk

 

[mesooohoppy]

okay no worries. thanks!

 

[jerbrun0515]

Looking for the rear hatch license plate bezel and the "gasket" piece that fits between it and the body. Pic attached as an example. Need the plastic mount points (in back of it) for the key lock cylinder to be intact.
MI 48879

Sent from my SM-G965U1 using Tapatalk

 

[G*Brock]

I want that license plate box. How much shipped to San Diego, CA 92008?

 

[onemanarmy]

i need all the mounting for the radiator. The metal vertical pieces that holds the radiator to the body, and the square nuts/bolts that those pieces bolt to on the radiator. There are 4 square nuts/bolts and also need the bolts that hold the shroud to the radiator support pieces.

Basically all bolts/nuts/mounting hardware for the radiator that can be taken off the radiator/shroud assembly

i'm in NC as well.

 

[brian_d]

Looking for air cleaner box and tube please. Shipped to 92078.

 

[TNFISHRMAN]

Need review mirror

Looking for a Rearview mirror for a 1999 or 2000 Toyota 4 runner. Fawn (tan) color.

 

[RPTFE00]

Hey man, you still have parts? If so I need a 4wd auto shifter and bezel. (SR5) I don’t need the limited one, it’s just for photo reference to what I’m talkin about.. Photo below. Thanks!!

 

[billmilner]

Studs, Washers, Nuts

Looking for the 4 studs, washers, & nuts from the output on the transfer case. These are in the companion flange on the back of the transfer case to bolt the drive shaft to. Thank you.

 

[layifioren]

Looking for the rear hatch license plate bezel and the "gasket" piece that fits between it and the body. Pic attached as an example. Need the plastic mount points (in back of it) for the key lock cylinder to be intact.
MI 48879

Sent from my SM-G965U1 using Tapatalk

Hello,

I'm sorry for the very delayed response. I actually wasn't getting notifications for a while and this totally skipped my mind. Are you still looking? I can check to see if I have a good one if you are. Thanks!

Sent from my SM-G930V using Tapatalk

 

[layifioren]

I want that license plate box. How much shipped to San Diego, CA 92008?

Hello, still looking? I'm very sorry for the delayed response.

Sent from my SM-G930V using Tapatalk

 

[layifioren]

Looking for a Rearview mirror for a 1999 or 2000 Toyota 4 runner. Fawn (tan) color.

Hello, I am sorry for not responding sooner. Are you still interested? Thanks!

Sent from my SM-G930V using Tapatalk

 

[layifioren]

Hey man, you still have parts? If so I need a 4wd auto shifter and bezel. (SR5) I don’t need the limited one, it’s just for photo reference to what I’m talkin about.. Photo below. Thanks!!

I'm sorry for not replying sooner. I do have them if you are still interested. Take care.

Sent from my SM-G930V using Tapatalk

 

[layifioren]

Looking for the 4 studs, washers, & nuts from the output on the transfer case. These are in the companion flange on the back of the transfer case to bolt the drive shaft to. Thank you.

Are you still looking? Sorry for the delayed response.

Sent from my SM-G930V using Tapatalk

 

[WeakSauz]

Hey, I am just a few miles from you in NC.

Have any A04A 4.30 elocker setups? front diff clamshell and full rear axle

 

[burkem04]

Do you have any rear lower control arms?

If so, price shipped to 48326 please.

Thanks