Parting 1998 4Runner SR5 4WD Marysville, WA

[G-C@T]

I need a brown interior plastic panel for the upper rear DS corner, C-Pillar area, in good condition.... Shipped to 31808. Any help?

 

[DeathCougar]

Money sent

[MENTION=32592]HammerHead[/MENTION] I will get that sent

I need a brown interior plastic panel for the upper rear DS corner, C-Pillar area, in good condition.... Shipped to 31808. Any help?

[MENTION=139181]G-C@T[/MENTION] Do you have a picture of what you need? There are many trim pieces in that area

 

[G-C@T]

I'll get a pic...but it's the huge plastic panel that covers the interior rear quarter panel. Thanks!

 

[DeathCougar]

I'll get a pic...but it's the huge plastic panel that covers the interior rear quarter panel. Thanks!

Oh the entire quarter trim. Those are much too large to ship, sorry

 

[G-C@T]

10-4.
Thanks.

 

[Scramble]

Hey Josh,
Do you have front driver & passenger side headrests from a 02 Sport? Color doesn't matter.
I could also use a DS O-shlt handle in oak.

 

[DeathCougar]

Hey Josh,
Do you have front driver & passenger side headrests from a 02 Sport? Color doesn't matter.
I could also use a DS O-shlt handle in oak.

No luck there, just oak leather at this time sorry!

The O-shoot handle on the drivers side mounts on the A-pillar. Is that what you need, or are you wanting one from the pass side above the door frame to add to the drivers side?

 

[Scramble]

No luck there, just oak leather at this time sorry!

The O-shoot handle on the drivers side mounts on the A-pillar. Is that what you need, or are you wanting one from the pass side above the door frame to add to the drivers side?

Let me ask you a question. I saw an 02 sport w/grey interior with bigger head rests than 96-01. Height & width looked the same but they were fatter & rounder, more cushion in the thickness. Is that factory?

Yes, I want to add one above the drivers door.

 

[DeathCougar]

Let me ask you a question. I saw an 02 sport w/grey interior with bigger head rests than 96-01. Height & width looked the same but they were fatter & rounder, more cushion in the thickness. Is that factory?

Yes, I want to add one above the drivers door.

[MENTION=7105]Scramble[/MENTION] All the headrests from the 4Runners are the same, so its likely that someone use a headrest from another vehicle, perhaps a Toyota Highlander? They have similar interior colors and patterns.

I have the Oh Crap handle for $20 shipped

 

[Scramble]

[MENTION=7105]Scramble[/MENTION] All the headrests from the 4Runners are the same, so its likely that someone use a headrest from another vehicle, perhaps a Toyota Highlander? They have similar interior colors and patterns.

I have the Oh Crap handle for $20 shipped

I know you part out tons of these but if you look on E-Bay you can see the different shapes of the headrests. I know the width of the posts are the same on all years. What about the difference between fixed & tilt adjustable headrests?

See attached below, the thin cloth look like my stock ones but the thick leather ones look like 02 Sport Cloth I saw.
(after doing some more research it looks like the Base model is thinner than a Limited)
96-02 Toyota 4Runner Base Model Oak Tan Front Seat Headrests Excellent | eBay
96-02 Toyota 4Runner Oak Tan Front Tilting Leather Limited Seat Head Rest Pair | eBay

 

[DeathCougar]

I know you part out tons of these but if you look on E-Bay you can see the different shapes of the headrests. I know the width of the posts are the same on all years. What about the difference between fixed & tilt adjustable headrests?

See attached below, the thin cloth look like my stock ones but the thick leather ones look like 02 Sport Cloth I saw.
(after doing some more research it looks like the Base model is thinner than a Limited)
96-02 Toyota 4Runner Base Model Oak Tan Front Seat Headrests Excellent | eBay
96-02 Toyota 4Runner Oak Tan Front Tilting Leather Limited Seat Head Rest Pair | eBay

The top picture is the rear headrests, bottom picture is the front. Unless you had base model headrests in there, then the fronts would match the back (minus the angle of the rods)

On non-base model rigs, the front headrests are thick and adjustable 96-02. On base model rigs, the front headrests are thin and non-adjustable.

Shoot me a picture of what you have in there currently.

 

[sod2010]

4 spoke black steering wheel

Would you happen to have a black leather steering wheel (4 spoke) in very good condition?

thanks

 

[DeathCougar]

Would you happen to have a black leather steering wheel (4 spoke) in very good condition?

thanks

No, sorry!

 

[Scramble]

The top picture is the rear headrests, bottom picture is the front. Unless you had base model headrests in there, then the fronts would match the back (minus the angle of the rods)

On non-base model rigs, the front headrests are thick and adjustable 96-02. On base model rigs, the front headrests are thin and non-adjustable.

Shoot me a picture of what you have in there currently.

I have 99 Base model seats in cloth & 02 Sport seats in cloth & the front head rests are the same thickness. I'll take pics. I'm really looking for adjustable thick front head rests.

 

[000Triple000]

Do you have a fuel pipe that links both fuel rails together?

 

[68ChargerJMP]

Selling works better if you respond!

 

[68ChargerJMP]

Sorry for the above comment....I was having a moment with my ac/heat temp control.

 

[DeathCougar]

Sorry for the above comment....I was having a moment with my ac/heat temp control.

I was on vacation in Cali bud Give me a chance to get straightened out today and I'll reply. Don't worry i haven't disappeared!

 

[BrianK14]

Parts

Cougar,
I am looking for a few rust free parts: 01-02 fuel filler tube, and rear upper and lower control arms.

 

[DeathCougar]

Cougar,
I am looking for a few rust free parts: 01-02 fuel filler tube, and rear upper and lower control arms.

No luck on the fuel filler

Control arms $85+ship for the set of 4