Photo Timeline of my 4Runner {LOTS OF PICS}

That's because of your 4.88s Haddix. That's what i was asking about earlier... Tire size isn't the only variable. If you regeared, then the normal tire size calculation isn't right. The new gears sorta split the difference. That's gotta be why LINY's #s are so off from ours. I would just like to see a calculator that takes the gear ratio change into consideration too. When my speedo reads 70, the GPS said 75. You have a slightly bigger spread in your numbers than I do Haddix, but you're running 35s and 4.88s against my 33s and 4.88s, so that's why (at least I think so).
 
thats crazy guys bc my gps and speedo are exactly the same from wat it says... from wat i can see and feel i might be ~2mph off and im running 33s.
 
Brian-yeah the gearing is the only thing I could think of but didn't think it would make that big of a difference. Apparently it does.
 
here's how I ran the mic cable:


also did a full detail...wash, clay, carnauba, took the seats out and vac, full interior clean, door jambs, glass...everything:


 
Last edited:
Rausch Creek Videos from 3/27 & 3/28

very low quality because I had to dumb it down for YouTube to be able to handle it =/

<object width="660" height="525"><param name="movie" value="http://www.youtube.com/v/3eHOqqi4kAY&hl=en_US&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/3eHOqqi4kAY&hl=en_US&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="660" height="525"></embed></object>

<object width="660" height="525"><param name="movie" value="http://www.youtube.com/v/h2nW1H0wIkU&hl=en_US&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/h2nW1H0wIkU&hl=en_US&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="660" height="525"></embed></object>

<object width="660" height="525"><param name="movie" value="http://www.youtube.com/v/2Ea6uJ8j2CU&hl=en_US&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/2Ea6uJ8j2CU&hl=en_US&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="660" height="525"></embed></object>

<object width="660" height="525"><param name="movie" value="http://www.youtube.com/v/vWY83GHEGbk&hl=en_US&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/vWY83GHEGbk&hl=en_US&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="660" height="525"></embed></object>
 
idea...
I was planning on painting my emblems to match the truck, but upon sanding I stumbled upon something new...





it's almost like a Brushed Stainless or a Pewter look...you guys like? ...or should I still paint them Millennium Silver?
 
Last edited:
i think it looks kinda good but not too sure. I say put one emblem back on the runner and decide if u like it or not... Color matching i think wont look as good.
 
checked out the pics.
those 3rd gens are easily the sexiest vehicles in that group.
LINY, how much lift are you sitting on overall?
and what exactly happened to that guy's blue jeep?
it hurts me just lookin at it.

Overall it's about 6-6.5":
OME 882 coils in the front gave me just shy of 4" and the Land Cruiser coils gave me about 5" out back plus the 2" body lift

The purple jeep broke both upper and lower ball joints and the axle's u-joint...we call that a catastrophic failure lol
 
Overall it's about 6-6.5":
OME 882 coils in the front gave me just shy of 4" and the Land Cruiser coils gave me about 5" out back plus the 2" body lift

The purple jeep broke both upper and lower ball joints and the axle's u-joint...we call that a catastrophic failure lol

nice.
I've officially decided I love your rig.

and ouchhh.
I don't really have any idea what that means but it definitely SOUNDS like a catastrophic failure.

btw i watched all the videos and that camera angle on the left rear is awesome. ha it's really cool to watch the flex.
 
idea...
I was planning on painting my emblems to match the truck, but upon sanding I stumbled upon something new...

it's almost like a Brushed Stainless or a Pewter look...you guys like? ...or should I still paint them Millennium Silver?

If you ever get the 97 ish lisence plate frame then do the Red 4Runner badge over a black Lisence plate frame holder.
 
LINY, I like the idea of the m. silver matching emblems. But I think the scratched chromed plastic looks like what it is. Your runner is way too sick for that. Does the 4runner emblem have holes behind it? Because, I think you should lose the 4runner emblem altogether and just put the T emblem on and match it in m. silver if you don't have to fill holes in the body.
 
LINY, I like the idea of the m. silver matching emblems. But I think the scratched chromed plastic looks like what it is. Your runner is way too sick for that. Does the 4runner emblem have holes behind it? Because, I think you should lose the 4runner emblem altogether and just put the T emblem on and match it in m. silver if you don't have to fill holes in the body.

yeah that's what I was thinking...I'm gonna color match them... the T emblem has holes, and the 4Runner one sticks on...I'd like to keep the 4Runner one to represent...I'm leaving off the SR5, 4WD and TOYOTA emblems though
 
yeah that's what I was thinking...I'm gonna color match them... the T emblem has holes, and the 4Runner one sticks on...I'd like to keep the 4Runner one to represent...I'm leaving off the SR5, 4WD and TOYOTA emblems though

I think that will look good.
 
so I popped in the T badge and I gotta say...it looks pretty fricken good...



side note...look at that metal flake in the fist picture! dayummm! not bad for 9 year old paint, huh?
 

Members online

Forum statistics

Threads
278,315
Messages
3,554,128
Members
248,016
Latest member
Advally Service

Trending content

Back
Top