Post Pictures of your Lifted 4th Gen 4runner

[Hayn4R]

Heeter,

That is sick bro. I havent seen the white/black color scheme yet. Looks narly ( in a good way). How much did this all cost you? Lift? Tires? Did you install yourself or took into a shop? I like those Toyo M/T's...any thoughts or concerns you would like to share about the tires or lift?

 

[Hayn4R]

Shakka,

Sweet ride bro. I have that exact same 4R (I have v6, not sure bout you). Just wanted to get some additional info. How much for the lift, tires, did you intall yourself? Any thoughts or concerns about tire choice or lift option. How is the ride/handling?

 

[EEtM33t]

dheeter,

Did you install the lift yourself or use a shop in the Seattle area?

 

[hammersc]

I think this may be my favorite truck on this whole site. Not overly tricked out, stout looking, big but also sort of stealth... very well done.

 

[MikesToy]

dheeter,

did you tint your whole windshield 50%?

 

[Falls]

got her a little dirty lastnight.

Looks tough !! :bigok:

 

[dheeter]

Thanks for all the comments. As far as the lift wheels and tires, it was a very tight fit. I had some spidertrax spacers but the wheels and tires wouldnt fit. I got pretty lucky with the offset, becasue with that size tire if you go too far in either direction they will rub. I did have to cut a little bit of the bumper and the lining in the fender, but you cant even tell. I got the wheels from rimzone.com for a hell of a deal. The tires are expensive, I think I paid around $350 a tire. But I had to do it, I had these tires before and I will never buy another mud tire. They are the best, they balance really well, they are the quietest mud tire and they have a good tread life. The lift I bought from toytec and had a local shop, estside custom truck install it, I think they charged $200 or $300. I wanted to do it myself, but decided not to after my friend got his finger smashed in a spring compressor a few days before. The whole windshield is tinted to 50%. I plan on tinting the rear windows to 20% or so. I would like them a little darker, but not 5%. As far as the total cost, I will let you do the math. Its alot, but I got alot of really good deals. I will be putting in a new sound system with a screen next as well as a new skid plate due to recent off roading damage . Thanks again for all your comments.

 

[Mark h20]

Daystar 2.5 front 2 rear 265/70/17 nokian vatiiva, piaa 1400 foglights in lower grill.

 

[CJ3Flyr]

Lots more pics here

http://www.toyota-4runner.org/showthread.php?s=&postid=368108#post368108

 

[Trik444]

Here's mine!

New wheel/tire combo - page 12.

http://www.toyota-4runner.org/showthread.php?s=&threadid=23302&perpage=15&pagenumber=1

 

[mprsev]

Thanks for all the comments. As far as the lift wheels and tires, it was a very tight fit. I had some spidertrax spacers but the wheels and tires wouldnt fit. I got pretty lucky with the offset, becasue with that size tire if you go too far in either direction they will rub. I did have to cut a little bit of the bumper and the lining in the fender, but you cant even tell. I got the wheels from rimzone.com for a hell of a deal. The tires are expensive, I think I paid around $350 a tire. But I had to do it, I had these tires before and I will never buy another mud tire. They are the best, they balance really well, they are the quietest mud tire and they have a good tread life. The lift I bought from toytec and had a local shop, estside custom truck install it, I think they charged $200 or $300. I wanted to do it myself, but decided not to after my friend got his finger smashed in a spring compressor a few days before. The whole windshield is tinted to 50%. I plan on tinting the rear windows to 20% or so. I would like them a little darker, but not 5%. As far as the total cost, I will let you do the math. Its alot, but I got alot of really good deals. I will be putting in a new sound system with a screen next as well as a new skid plate due to recent off roading damage . Thanks again for all your comments.

Looking good dheeter! Did you do the black out headlights and taillights yourself?

 

[Fo_SheeZy]

Looking good dheeter! Did you do the black out headlights and taillights yourself?

PM Bowtie3, if you're interested in the headlights.

 

[HB 4X4]

I think this may be my favorite truck on this whole site. Not overly tricked out, stout looking, big but also sort of stealth... very well done.

Thanks man. Sorry I didn't catch this sooner. The last time I posted in this thread was on my old account, so I didn't get e-mail notifications for it. I have modified a little since then. Better lift, rock sliders, etc. Looking for some bigger tires next. Here it is now. I think the side exit exhaust is new since those pictures too. Good thing, or I would have ripped off my stock exhaust pipe offroading long ago. :bigok:

 

[kego37]

4th gen with 35s

i have a 3/2 revtech lift with a toytech 1in body lift and 2in spacers im running 35s with alittle trimming

 

[cmoney]

Iron Clad, how did you mount those hellas on the bumper? did you drill? im trying to mount some in the front as well but can't afford a light bar for now.

 

[04LTtacoma]

I don't own a 4runner though.=(

 

[A10MileHusker]

3/2s are cool for awhile...but 35s are the way to go!! Right kego!??

 

[gaterose]

You guys know this thread is 4 years old and we already have a "Lift & Tire Central" thread right?

 

[zstampe]

You guys know this thread is 4 years old and we already have a "Lift & Tire Central" thread right?

Hey everyone, my names Matt and I hate fun!!!

Lol

 

[Iron Clad Lou]

Iron Clad, how did you mount those hellas on the bumper? did you drill? im trying to mount some in the front as well but can't afford a light bar for now.

yea buddy...drilled right through the bumper...this thread may help
http://www.toyota-4runner.org/gallery/30625-updated-pics.html