Pro Comp Wheels Center Cap Modification So They Will Fit.
Put Pro-Comp 7105 wheels on but like most others with pro-com wheels the center cap will not fit due to the clearance issues. There is enough clearance between the axle locating hub and the new pro-comp wheels but the cap hits the locating hub on the axle and will not allow it to fit.I took the center caps and with a Dremel I cut 4 notches about 1/2" deep from the open end of the cap so the ID of the center cap would not hit the axle locating hub and left 4 tabs aprox. 1/2" wide. Then leave off the supplied rubber O-ring.The caps fit on perfectly.
Thought somebody might be interested.
arty:
<a href="http://s1096.photobucket.com/albums/g323/4runner10/?action=view¤t=IMG_0306.jpg" target="_blank"><img src="http://i1096.photobucket.com/albums/g323/4runner10/IMG_0306.jpg" border="0" alt="Photobucket"></a>
Put Pro-Comp 7105 wheels on but like most others with pro-com wheels the center cap will not fit due to the clearance issues. There is enough clearance between the axle locating hub and the new pro-comp wheels but the cap hits the locating hub on the axle and will not allow it to fit.I took the center caps and with a Dremel I cut 4 notches about 1/2" deep from the open end of the cap so the ID of the center cap would not hit the axle locating hub and left 4 tabs aprox. 1/2" wide. Then leave off the supplied rubber O-ring.The caps fit on perfectly.
Thought somebody might be interested.
arty:
<a href="http://s1096.photobucket.com/albums/g323/4runner10/?action=view¤t=IMG_0306.jpg" target="_blank"><img src="http://i1096.photobucket.com/albums/g323/4runner10/IMG_0306.jpg" border="0" alt="Photobucket"></a>
Last edited:
