KidVermicious
New member
You've seen the Chilkat mounts, right?
Project White Rhino Iroke's Monster
- Thread starter Iroke17
- Start date
You've seen the Chilkat mounts, right?
try Toyota CelicaSupra Forums - CelicaSupra.com i am sure someone on there will have a set.. Thats where I plan on trying to get mine.. Looking to do the same build as you.. not sure if I missed something but why are you going all the way down to the frame?
The what?
KidVermicious
New member
Never mind, I was wrong. They've got mounts for 3rz and 5vze swaps, but not the 5m/7m I guess. Sorry.
I am currently IFS now.. Have not made my mind up yet as if I will change to SAS.. I do want to put in a 7MGTE..
What I mean by all the way to the frame is did you have to take the body off for this build? Just curious why you did that? I see you are welding some stuff on the frame.. What is that for?
What I mean by all the way to the frame is did you have to take the body off for this build? Just curious why you did that? I see you are welding some stuff on the frame.. What is that for?
Bad_Vision
Moderator
Yes I have toyed with the idea but alas time is killer.
I'm just buying them, then I can duplicate them. I have to install the lockers this summer so if you can wait till then I can try.
I'm just buying them, then I can duplicate them. I have to install the lockers this summer so if you can wait till then I can try.
ok so i got today and tomorrow off so hoping to get a bit accomplished got one of the back corners pretty much finished
before
after
Also guys need some serious help this ebrake cable is driving me insane trying to get it off i know i can get a new front section from rockauto but not the rear im having major issues trying to get the mid section apart where the threded rod is i can get the back one to spin but the front one i cant get cause the rear spins there is nothing to hold on to i even used vice grips at the vary rear of the rod and it just shreaded the threads im about to cut it
any advice?
before
after
Also guys need some serious help this ebrake cable is driving me insane trying to get it off i know i can get a new front section from rockauto but not the rear im having major issues trying to get the mid section apart where the threded rod is i can get the back one to spin but the front one i cant get cause the rear spins there is nothing to hold on to i even used vice grips at the vary rear of the rod and it just shreaded the threads im about to cut it
any advice?
Bad_Vision
Moderator
Make your own cable dude! Get some from hardware store and then get cable clamps for it.
well i got the cable apart with a bit of help from some mapp gas lol i dont think im gona put it back on since i will be doing rear disk in the near future and ill put on a drive shaft parking break instead.
Also welded up at least 20 holes in the frame already and i dont think im even 1/4 way done!
also removed the gear box and the shocks now the only thing holding it together is the shackles
also dose anyone know if i can get a new sterring bar from anyware autozone dose not have any
talking about the boomerang sort of bar?
Also welded up at least 20 holes in the frame already and i dont think im even 1/4 way done!
also removed the gear box and the shocks now the only thing holding it together is the shackles
also dose anyone know if i can get a new sterring bar from anyware autozone dose not have any
talking about the boomerang sort of bar?
Similar threads
