shallcallhimtim
New member
Is the 3inch spacer lift just the 2.5 inch lift with the 1/4 inch top plate? if i was to use the 2.5 inch spacer and stock rear springs would the truck sit level?
question about toytec 3inch spacer lift
- Thread starter shallcallhimtim
- Start date
Register to hide this ad
snowbrdr033
New member
Have you read the Sticky on top of this page about lift kits? If not, go check it out, ARK outlined a bunch of various lifts, what they do and what they're compatible with!
:girl:
:girl:
Dougtoms01
New member
I have a 2008 V6, 4WD. SR5
I put a 1" spacer in front (2" resulting lift) which would have set me just about level.
I put a 1.5" in the rear.
Here was my numbers.
Ok, final results.
Dimensions front before lift = 18.75 After = 21.0
Dimensions rear before lift = 21.50 After = 23.0
I put a 1" spacer in front (2" resulting lift) which would have set me just about level.
I put a 1.5" in the rear.
Here was my numbers.
Ok, final results.
Dimensions front before lift = 18.75 After = 21.0
Dimensions rear before lift = 21.50 After = 23.0
