Rear Recovery Point Sale $90 per pair - Kansas

[Inv4drZm]

Any left? In for a pair, PM sent!

PM sent. Still plenty left.

 

[RainGoat]

Can you out me on the interested list?

Sorry for the delayed follow up. Just wanted to note I received mine in a reasonable time frame & they are very beefy- the bolts would fail first. Easy to paint & look easy to mount with the included hardware. Thanks!

 

[Inv4drZm]

Sorry for the delayed follow up. Just wanted to note I received mine in a reasonable time frame & they are very beefy- the bolts would fail first. Easy to paint & look easy to mount with the included hardware. Thanks!

Glad you like them!

I think we have somewhere around 20 left, they've been selling pretty well the past week for some reason.

 

[jon.salpas]

If you still have some, I'd like one.

If they happen to also fit a '19 Taco I'll take two.

 

[Inv4drZm]

If you still have some, I'd like one.

If they happen to also fit a '19 Taco I'll take two.

Okay I'll send you a PM with ordering info.

For the Taco I'm guessing it'll fit but you should be able to measure the distance between the mounting points on your 4Runner and compare it to your Tacoma to be sure.

If it doesn't work out we'll refund you and you can ship it back.

 

[PotatoDelta]

I might be interested in a pair. Just bought my 4th gen 4Runner and getting it ready for off road use, what exactly needs to be done to the exhaust to reroute it to the side so I can mount the passenger side one?

 

[BendRunner]

I might be interested in a pair. Just bought my 4th gen 4Runner and getting it ready for off road use, what exactly needs to be done to the exhaust to reroute it to the side so I can mount the passenger side one?

An exhaust shop can do it for you pretty cheap. Resonator needs to be cutoff and a 45 welded on to dump the exhaust behind the right tire.

 

[Inv4drZm]

I might be interested in a pair. Just bought my 4th gen 4Runner and getting it ready for off road use, what exactly needs to be done to the exhaust to reroute it to the side so I can mount the passenger side one?

An exhaust shop can do it for you pretty cheap. Resonator needs to be cutoff and a 45 welded on to dump the exhaust behind the right tire.

I am not certain if the 5th gens have our rear resonators, I've been meaning to look at some pictures online to see.

But even if they didn't have resonators it still might be close enough to the exhaust pipe to rub with a strap through it, or pulling at different angles might snag the exhaust and crumple it so it would still be best to chop it short more than likely.

I took a reciprocating saw to mine and cut it so it exits right behind the rear tire which works well for me. Or like mentioned you can have a shop reroute it with new piping.

 

[Inv4drZm]

I might be interested in a pair. Just bought my 4th gen 4Runner and getting it ready for off road use, what exactly needs to be done to the exhaust to reroute it to the side so I can mount the passenger side one?

Shoot I could have swore you said 5th gen for some reason. Disregard my post above.

If you want I can post pictures of where I cut mine, or like mentioned have a shop cut and reroute it to the side.

 

[PotatoDelta]

Shoot I could have swore you said 5th gen for some reason. Disregard my post above.

If you want I can post pictures of where I cut mine, or like mentioned have a shop cut and reroute it to the side.

That would be great! I went by a muffler shop close to me and they said they could cut the resonator off and reroute it to behind the rear passenger tire for $60. I don't think that's bad at all!
Only thing I was thinking though was, do you still use the original hanger for the exhaust pipe not to rattle?

 

[Inv4drZm]

That would be great! I went by a muffler shop close to me and they said they could cut the resonator off and reroute it to behind the rear passenger tire for $60. I don't think that's bad at all!
Only thing I was thinking though was, do you still use the original hanger for the exhaust pipe not to rattle?

OK here are some pics. Pretty simple

Mine doesn't rattle without a hanger but it is a little shorter too. They could probably reuse the stock hanger if they had to.



With a recovery point mounted:

 

[DC4kids]

As early as next week, but maybe the week after that. As soon as I know with more certainty (get the call from the fab shop making these) I can update this thread and PM all the guys that have made payments.

I know I forgot to update some of my PM's to you guys, I left the 4-6 week lead time instead of updating it every week.

Do you have any left?

 

[Inv4drZm]

Do you have any left?

Sorry, none are left.

We might eventually do another batch so subscribe to this thread.

 

[sfall]

im interested, any more available

 

[DirtyDanno]

Also interested.

 

[PotatoDelta]

Yeah I have a friend that is interested in a pair as well if you get more in stock

 

[amnt]

interested

 

[teotwaki]

Subscribed

 

[halusha]

Subscribed

 

[Anand]

If anyone is interested, I have a pair of these, never installed, spray painted black, still w/ the hardware and everything that I'd be willing to part with.

They look great, I just never got around to installing them and have a rear bumper that should be arriving within the month which has recovery points integrated

SOLD!!! -- Read below, more are available now!!