Rear Recovery Point Sale $90 per pair - Kansas

[oljedi11950]

[MENTION=78968]oljedi11950[/MENTION] is

 

[Inv4drZm]

Been watching this for awhile
Interested
Curious about the unused 3rd hole in patkelly4370s pic? Additional support if we decide to drill frame?
How difficult/what’s required in rerouting exhaust?
Wouldn’t want to cut exhaust if not necessary or would like to know more about the effects of cutting if need be
Excited these back
Thanks again everyone

We designed it like that so they can be flipped around and used on the other side of the frame, and they are offset to avoid a weld seam that keeps it from mounting 100% flush though that's really just so it looks nicer. It's just to give you different mounting options.

Due to different 4Runner models having different exhaust tailpipes, not to mention aftermarket exhausts, we know the driver's side will fit fine but can't really guarantee the passenger side will fit unless you visually verify that side has clearance from the hot exhaust piping. I wouldn't want the exhaust to get mangled in an off-axis pull and most recoveries can be made with just the driver's side recovery point.

That said, for those that want the most pulling options, or the most bumper protection as these, at least on FJ's, I've seen take a beating driving down rock ledges and save the bumper from getting hit, we have the option of 2 recovery points. And if for whatever reason the passenger side doesn't fit I'm sure we can work out a refund.

 

[Daemoro]

Just in case you needed to hear it, I'm still interested. Thanks.

 

[patkelly4370]

As noted, I did cut my exhaust.
I've been wanting to anyway to avoid crushing the tip while offroading.
I didn't trim enough, it was still pointing straight back and did melt a small part of the rear plastic. Nothing that cant be trimmed to look decent. Also melted the white plastic between the bumper cover and frame. I intent to replace with a real metal bumper some day.
In the mean time, I did clamp a turndown/out to the exhaust pipe and that has prevented further melting of the plastic.

Sent from my SM-G955U using Tapatalk

 

[nm_t4r]

Sub'd. I'm interested.

 

[engallop]

[MENTION=100551]Wingman707[/MENTION] [MENTION=72648]Daemoro[/MENTION] [MENTION=511893]cwilliams563[/MENTION] [MENTION=592167]vdog2000002[/MENTION]

And everyone else.

We might be starting another batch soon.

Anyone else interested?

I’d also be interested in a set if another batch is made.

 

[sfall]

[MENTION=100551]Wingman707[/MENTION] [MENTION=72648]Daemoro[/MENTION] [MENTION=511893]cwilliams563[/MENTION] [MENTION=592167]vdog2000002[/MENTION]

And everyone else.

We might be starting another batch soon.

Anyone else interested?

me, i am still interested

 

[J-Roc]

I’d be in for the next batch for sure!

 

[JMFP!]

Anyone else interested?

Also interested in a set

 

[The Yin]

[MENTION=100551]Wingman707[/MENTION] [MENTION=72648]Daemoro[/MENTION] [MENTION=511893]cwilliams563[/MENTION] [MENTION=592167]vdog2000002[/MENTION]

And everyone else.

We might be starting another batch soon.

Anyone else interested?

I'm interested!

I subed to this thread waiting for a new batch to come.
Got a Gibson catback with side exit and should have the space for one per side.

 

[gigajoe]

Id buy a set.

thanks

 

[Inv4drZm]

[MENTION=506161]gigajoe[/MENTION] [MENTION=100551]Wingman707[/MENTION] [MENTION=72648]Daemoro[/MENTION] [MENTION=511893]cwilliams563[/MENTION] [MENTION=592167]vdog2000002[/MENTION] [MENTION=486118]dcguy[/MENTION] [MENTION=508972]NB17Limited[/MENTION] [MENTION=177599]scottiezilla[/MENTION] [MENTION=78968]oljedi11950[/MENTION] [MENTION=72648]Daemoro[/MENTION] [MENTION=260759]nm_t4r[/MENTION] [MENTION=640129]engallop[/MENTION] [MENTION=363911]sfall[/MENTION] [MENTION=147171]J-Roc[/MENTION] [MENTION=149963]JMFP![/MENTION] [MENTION=116319]The Yin[/MENTION] [MENTION=219032]DallasTRDPro[/MENTION] [MENTION=592167]vdog2000002[/MENTION] [MENTION=228353]stay_tuned[/MENTION] [MENTION=348948]Mudballz[/MENTION]

Price is $90 shipped for a pair and $50 for a single. PM me for payment details.

Next batch price is increasing $5 due to material cost increases.

 

[Inv4drZm]

Also, they are about a month out.

I have a feeling we might be doing another batch shortly afterward due to the high interest, depending on if all you guys buy a set and if we have any more late joiners on this forum or the FJ forum.

 

[JMFP!]

[MENTION=149963]JMFP![/MENTION]

... PM me for payment details...

Woohoo!! PM sent.

 

[cwilliams563]

Payment sent. Thank you

 

[danthemanx07]

I have a set of these on my GX and love them. To save me the trouble of pulling one off and checking the fit - do these work on 3rd gens??

 

[Inv4drZm]

I have a set of these on my GX and love them. To save me the trouble of pulling one off and checking the fit - do these work on 3rd gens??

Yes, someone verified the bolt spacing was the same, they should work though I don't remember if anyone has bought them for their 3rd gen 4Runner yet.

 

[mindelevation]

Awesome. Payment sent. Can't wait. Thanks!

 

[danthemanx07]

Yes, someone verified the bolt spacing was the same, they should work though I don't remember if anyone has bought them for their 3rd gen 4Runner yet.

Gotcha. I'll pull one off my GX and check the spacing and report back to confirm for anyone else that is wondering.

 

[Wingman707]

Wingman707 Count me in

Thank you for the update. Count me in. Let me know order details. Even the little guys are getting in on the stimulus payouts. Let's go!!