TeryT
New member
I've had these rear air bags in for about 2 years, and they've been nothing but trouble! (I put the bags on primarily to keep the rear from sagging so much when I tow.) The factory replaced one when it started leaking around the brass fitting. But the most frustrating issue has been the constant kinks in the air lines coming out of the bags, which causes leaks. I always leave 5-10 PSI in the bags, so the lines shouldn't kink, but they do anyway.
I even put a slightly larger diameter rubber hose around the lines going into the bags, thinking this would keep them from kinking. Nope!
The first time they kinked is when I had just put them on, and then went offroading a fairly aggressive trail. Other times they've perhaps kinked while towing, but not 100% sure.
So now I need to replace the bump stops I cut out as per the Airlift instructions - any easy way to do this? (maybe go with Timbrens instead?)
I even put a slightly larger diameter rubber hose around the lines going into the bags, thinking this would keep them from kinking. Nope!
The first time they kinked is when I had just put them on, and then went offroading a fairly aggressive trail. Other times they've perhaps kinked while towing, but not 100% sure.
So now I need to replace the bump stops I cut out as per the Airlift instructions - any easy way to do this? (maybe go with Timbrens instead?)