Replacing Motor Mounts

[AssBurns]

Nope just unbolted the mounts and used a spiral jack to lift the mount up a few inches by the bell-housing. It gave me just enough room to work. It was very tight but it worked. We bolted everything up, lowered the engine, tacked it all, unbolted it, lifted the engine and welded it all up, dropped the engine, and bolted it all back up again.


Sent from my iPhone using Tapatalk

 

[OldManKamps]

Nope just unbolted the mounts and used a spiral jack to lift the mount up a few inches by the bell-housing. It gave me just enough room to work. It was very tight but it worked. We bolted everything up, lowered the engine, tacked it all, unbolted it, lifted the engine and welded it all up, dropped the engine, and bolted it all back up again.


Sent from my iPhone using Tapatalk

Wow, I'm impressed!

 

[jkeith.w]

Nope just unbolted the mounts and used a spiral jack to lift the mount up a few inches by the bell-housing.

ah yeah; we call them 'dead man' jacks. (seems I don't know the correct term for anything in this business )