**RiDE T4R Build** 2011 LE Zombie Crusher
- Thread starter RiDE
- Start date
RiDE
New member
Taskforce- Those look really good on your truck. You're definitely making me think twice now. 
Do you have any more pics of the truck as whole with the double standards on?
Thanks for the compliments guys. The truck has gone through a lot of changes in the short time i've had it. I never really thought I would get into off roading as much as I did. That first time was definitely a gate way drug.
Next big purchase is going to be either a RTT or a rear bumper with a swing away.
Do you have any more pics of the truck as whole with the double standards on? Thanks for the compliments guys. The truck has gone through a lot of changes in the short time i've had it. I never really thought I would get into off roading as much as I did. That first time was definitely a gate way drug.
Next big purchase is going to be either a RTT or a rear bumper with a swing away.
TaskforceRudy
New member
Ride- This week I'll have all the rims on, then I'll send you photos. The first batch of double standards was not manufactured to spec and they rubbed on front brake caliper(the rears cleared enough to move the truck hence the rear only photo). Method sent me 4 new rims and I'll have them on this week. When its all finished I'll hit you up for sure.
RiDE
New member
Gobi Sun roof insert with Rotopax 2g gas/2g h20
Gobi Sun roof insert with Rotopax 2g gas/2g h20
I had some time to finally put these two together. I went with Rotopax's 2g gas and 2g water combo with their dual mounting plate (1 lock). The fit of everything is perfect and the install is very simple. Sorry about the cell phone shots.
Gobi Sun roof insert with Rotopax 2g gas/2g h20
I had some time to finally put these two together. I went with Rotopax's 2g gas and 2g water combo with their dual mounting plate (1 lock). The fit of everything is perfect and the install is very simple. Sorry about the cell phone shots.
Looks nice Ride. Just a suggestion, and it is hard to tell from the photos, but the screws/bolts that are used in the clamps that hold the Rotopax mount to the sunroof insert, look very long. Even in your carpet, looks like the insert is setting up about 1/2 inch or so. If so, you might want to measure prior to attempting to install so you do not scratch, break, or what-have you the top of your vehicle. Might have to cut those bolts down a bit............ just saying. Be safe.
RiDE
New member
jtraskall- Thanks for the heads up. I planned on cutting them down but they clear the sunroof by a good amount the way they are.
QJake- Haven't decided yet. I'm really happy with my current wheel/tire setup which is why I don't really want to switch it up again. I was also looking for 285/70-17 Wrangler MT/R's for the Method's but they are sold out everywhere. So it might be a no go for the Method's for now. Shipping my current tires to you might be way too expensive. It'll be more cost efficient for you to just buy them from a tire place.
update:
I ordered my OTRATTW switches today. I should be picking it up from them in the next couple days. These guys are about 20 minutes away from me which makes things very easy. Hopefully I can get all my lights wired up by this weekend. I really want to see what these Rigid's look like at night.
Just a updated pic from today. I really like the look of these tailights.
QJake- Haven't decided yet. I'm really happy with my current wheel/tire setup which is why I don't really want to switch it up again. I was also looking for 285/70-17 Wrangler MT/R's for the Method's but they are sold out everywhere. So it might be a no go for the Method's for now. Shipping my current tires to you might be way too expensive. It'll be more cost efficient for you to just buy them from a tire place.
update:
I ordered my OTRATTW switches today. I should be picking it up from them in the next couple days. These guys are about 20 minutes away from me which makes things very easy. Hopefully I can get all my lights wired up by this weekend. I really want to see what these Rigid's look like at night.
Just a updated pic from today. I really like the look of these tailights.
Last edited:
jca21
New member
Qjake
New member
Agreed, hence why I said if the price was right. When I bought mine I looked into a dealer from Connecticut (every one around here wanted around $340 + tax) he had the best price but wanted $150 to ship and he was only about 100 miles away. Ended up with Discount Tire Direct for about $270/ea with no tax and free ship from Arizona. Go figure :shrug:
Thanks anyway!
Last edited:
TaskforceRudy
New member
yep I'm running 285/70's
MrClark003
New member
A little off topic, but what's going on with the Ducati gas tank on the floor in the background? How many different projects are you working on?
RiDE
New member
Too many projects. That tank is for my '07 S2R800. The bike is all red but I'm in the middle of switching all the painted parts to black and leaving the frame Desmo red. weeeee- You've got a PM. Method's are for sale.
FactoryRide
New member
You can't just throw up a teaser like that.. :roadkill: lol Looking forward to more pictures. 4runner has come along extremely nice.
mikey's2010SR5
New member
I thought you went full hoops?
I want mine so bad!
I want mine so bad!
RiDE
New member
Thanks guys! The bumper just finishes off the truck. Shrockworks does a really good job on these bumpers.
Mikey- I went with full hoops originally but I was back and forth between them. I ended up changing it to center hoop only the day after I placed my order.
I'm heading up to OTRATTW to pick up switches this afternoon and will get some better pics of the truck then.
...now the stock rear bumper is really bugging me.
Mikey- I went with full hoops originally but I was back and forth between them. I ended up changing it to center hoop only the day after I placed my order.
I'm heading up to OTRATTW to pick up switches this afternoon and will get some better pics of the truck then.
...now the stock rear bumper is really bugging me.
Similar threads
