Roof Rack Sale 10 Percent Off!

[Victory 4x4]

Daryl posted the Tacoma Roof Rack and changed the coupon code RACKCITY from 5% to 10% so it will be valid on 4Runner racks as well through 5/31. Now is the time to order!

5th Gen 4Runner Roof Rack

Those who have already ordered with the old coupon can call in and get the difference in store credit!


This roof rack system allows for mounting almost anything, freeing up valuable cargo space for other trip essentials. Comes coated with a 2 stage satin textured black powder coat over durable zinc primer finish.

• CNC cut and formed from 3/16" aluminum (steel mounting brackets) with extruded aluminum rails
• Easy bolt together installation
• No drilling required
• Available with or without 40" lightbar cutout (on the full-length rack)
• Milled T-nut access points
• Fairing Edge Trim Included
• Powdercoated
• Hardware Included
• Made in the USA
• Free shipping!

 

[CementTruck]

Nice! I was one of the first orders for RACKCITY, so gonna call in today for the store credit. Thanks!

 

[Victory 4x4]

Nice! I was one of the first orders for RACKCITY, so gonna call in today for the store credit. Thanks!

Thank you!

 

[johndoug]

Installed mine today

 

[halflife78]

Installed mine today

How hard was it to install? Got mine in today and never done a roof rack install before.

 

[Caveman_Yota_13]

Guys interested in other accessories is something we can do if were ordering multiple items?

 

[johndoug]

How hard was it to install? Got mine in today and never done a roof rack install before.

Not too bad, watched the video while doing it. Suggest buying a good set of Allen wrenches (T ones) before you start. Two of us did it in about an hour and a half or so and that was taking our time and with a few interruptions. Have the permatex shown in the video before you start. Also, place the wind deflector at the front of the rack as close to the roof as you can. When it was higher is made a VERY VERY LOUD slapping noise at 60 MPH before lowering it. Took it up to 85 after lower it and no problems.

 

[halflife78]

Not too bad, watched the video while doing it. Suggest buying a good set of Allen wrenches (T ones) before you start. Two of us did it in about an hour and a half or so and that was taking our time and with a few interruptions. Have the permatex shown in the video before you start. Also, place the wind deflector at the front of the rack as close to the roof as you can. When it was higher is made a VERY VERY LOUD slapping noise at 60 MPH before lowering it. Took it up to 85 after lower it and no problems.

I prepared for the deflector to be all the way down, I had my Clearbra dude put a strip on the front and rear of the roof where the deflector sits as extra protection from rubbing.

 

[johndoug]

Does anyone know what size T-nut fit in this rack?

 

[mr.walleye]

any chance for a blitz bumper sale?

 

[Victory 4x4]

does anyone know what size t-nut fit in this rack?

1/4-20

 

[Simon2150]

So the required Allen wrenches to install roof rack are 1/4 and 3/16?

 

[Barcelona4R]

Damn that's a great deal. If I hadn't ordered my Gobi back in March I would have gotten this one today.


Side note I should be getting my rack end of next month

 

[Victory 4x4]

So the required Allen wrenches to install roof rack are 1/4 and 3/16?

You will need a 5/32 and a 3/16.

 

[heybert]

So I can still use the tilting function of my sunroof with the full rack?

 

[Victory 4x4]

So I can still use the tilting function of my sunroof with the full rack?

Yes, you should be able to adjust the crossbars to allow it to tilt without a problem. Just double check when heavily loaded.

 

[TRD PANTHER]

What is the status of your 3/4 rack?

 

[ProfessorP]

What is the status of your 3/4 rack?

I called Victory to check on mine yesterday. They said I was the first to order the standard (3/4) length rack back on May 6 and it should be completed sometime in the next week or so.

 

[Victory 4x4]

What is the status of your 3/4 rack?

They are now in production! Should now be the same lead times as the full racks 12-15 days.

 

[TRD PANTHER]

They are now in production! Should now be the same lead times as the full racks 12-15 days.

I didn’t see a price or specs on your website. Do you have a link or any info? Also, how is the wind noise with the fairing adjusted properly? Is black hardware available? Looks nice.