Seattle Area Maintenance and Meet

[Hepar]

Just starting a dialog. My list of things I need to do is getting longer and longer. Both CV's are now torn. Need to replace the boot on my UBJ. Possibly do a trans cooler and some other small stuff. I know Jason (Theizzardking) was interested too. My friend has a full shop in Redmond, but I would be open to other locations as I know there are guys down South that I've yet to meet.

Give me your thoughts!

 

[the great him]

well if it falls on a day that im not working i could be down for it, i know i need to come up that way at some point to go to tac taylor

 

[Hepar]

well if it falls on a day that im not working i could be down for it, i know i need to come up that way at some point to go to tac taylor

Do you have a set work schedule? I'm self-employed, so I'm pretty flexible with my schedule.

 

[the great him]

lol well i have three jobs, four if you include being a dad and husband lol i work for the sheriffs office and co-owner my own company, as well as being in the army, so some times i have all the time in the world and some times i can ever get any sleep

 

[jmt2404]

Just let me know of the day... I got a baby due end of Oct ish.. and I won't be back in town till end of Sept.. and I have a 2 car garage with cheap air tools.. but if you have a big lift you wont be able to get in lol..

Wished I would have know me and a Wilson just installed his 199s at my house the other day.. we could have invited more ppl then.

 

[the great him]

Just let me know of the day... I got a baby due end of Oct ish.. and I won't be back in town till end of Sept.. and I have a 2 car garage with cheap air tools.. but if you have a big lift you wont be able to get in lol..

Wished I would have know me and a Wilson just installed his 199s at my house the other day.. we could have invited more ppl then.

thanks for the invite jerk! :bigok::hiding::hello:

 

[Hepar]

thanks for the invite jerk! :bigok::hiding::hello:

Yeah, I know two people who are off this invite list.

 

[jmt2404]

Haha sorry guys it was super short notice.. next time ill post it up.. we planned it like wed and then got together on sat I think, maybe Friday.. can't remember. Anyways sorry guys we wilk hit you up next time..

 

[the great him]

Haha sorry guys it was super short notice.. next time ill post it up.. we planned it like wed and then got together on sat I think, maybe Friday.. can't remember. Anyways sorry guys we wilk hit you up next time..

you better, i know where you live :wink2:

 

[jmt2404]

Hhhooooaaaaahhhhh! Haha.. sorry that's terrible..

 

[fattirerider]

I have a CBI bumper on order and should see it in a couple weeks. I may need some help installing it or if I've done it already I'm always down to stand around and watch other people work.

 

[Hepar]

Haha sorry guys it was super short notice.. next time ill post it up.. we planned it like wed and then got together on sat I think, maybe Friday.. can't remember. Anyways sorry guys we wilk hit you up next time..

Lol. I'm just giving you sh*t. I've been gone pretty much every weekend since the end of June, so I wouldn't have been able to meet up anyways.

I have a CBI bumper on order and should see it in a couple weeks. I may need some help installing it or if I've done it already I'm always down to stand around and watch other people work.

Nice! I'm definitely down to drink a beer and watch some others put that on!

 

[theizzardking]

i leave for Hawaii on wends then am gone for a week, but hit me up any time after that, i still need to swap out my cv's haven't gotten around to getting the new seals yet. you got my digits make the call broham, lol

 

[Hepar]

i leave for Hawaii on wends then am gone for a week, but hit me up any time after that, i still need to swap out my cv's haven't gotten around to getting the new seals yet. you got my digits make the call broham, lol

And I thought I was all over the place this summer...

 

[jmt2404]

How does the 15th sound? I should be able to get some time if the wife doesn't go into labor that weekend..

I have a bunch if stuff I need to do as well..power steering pump and put in my dual battery set up.. anyone got an extra crankshaft pulley laying around that I can buy from them?

 

[codyjh]

If I am available, I would be up to meet the local T4R derelicts!:driving:

 

[Hepar]

How does the 15th sound? I should be able to get some time if the wife doesn't go into labor that weekend..

I have a bunch if stuff I need to do as well..power steering pump and put in my dual battery set up.. anyone got an extra crankshaft pulley laying around that I can buy from them?

Crap, I'll be out on the coast that weekend. I can do next weekend or the weekend of the 21st.

 

[jmt2404]

Ok.. that will give me some time to build my tray for the batteries and get the wire I need.. hopefully the wife will have the baby by then or either have it later. Her due date isn't till Nov 10 by the doc but she is probably gonna have her early.. we will see.

Who else is gonna come and where we doing this at? I got a 2 car garage with some tools. I live in tacoma so its kind of mid way between Seattle and Portland.. I got a seal driver for izz if you need it..

 

[theizzardking]

ok i'm back now, done traveling and f'ing about for a while, hepar txt me a few days before this goes down and i'll be there, got all of the tools needed 'cept the seal driver. please bring with if you can, that would rock!

who ever wanted that lift kit hit me up and i'll bring it with also just realized i have a spare set of 8 wraps and a 3/4 inch alum spacer kit for the front as well, so if someone wants, 99 springs and shocks with 3/4 inch spacer up front and and some 8 wraps in the back for a budget lift. can't remember who it was, but if your still around pm. it's officially fall and i'm getting tired of it taking up space.

 

[Hepar]

Ok.. that will give me some time to build my tray for the batteries and get the wire I need.. hopefully the wife will have the baby by then or either have it later. Her due date isn't till Nov 10 by the doc but she is probably gonna have her early.. we will see.

Who else is gonna come and where we doing this at? I got a 2 car garage with some tools. I live in tacoma so its kind of mid way between Seattle and Portland.. I got a seal driver for izz if you need it..

Well, my friend has a full heated shop in Redmond that we could use. Pros being that it's big with tons of space to work on vehicles with almost every tool available including air. Cons that it's in Redmond. Pros of your place are that it seems like it's more in the middle for the guys in the South and North, you've got the seal driver that Izz needs and it also sounds like you've got great tool options. Cons are that I thought you said something about not being able to get lifted rigs inside? Not sure obviously on the weather, but assuming it will be wet. I'm down for either place.

ok i'm back now, done traveling and f'ing about for a while, hepar txt me a few days before this goes down and i'll be there, got all of the tools needed 'cept the seal driver. please bring with if you can, that would rock!

Will do Izz.