Seattle Area Maintenance and Meet

Yeah I figured you had.. You should just do the v8 swap with me..

Anyone have an cherry picker? I would really rather not go rent one if I dont have to.. I go the heads off my truck but now I still cant get the rest of the bolt out of the crank..
 
jmt2404 said:
Yeah I figured you had.. You should just do the v8 swap with me..

Anyone have an cherry picker? I would really rather not go rent one if I dont have to.. I go the heads off my truck but now I still cant get the rest of the bolt out of the crank..
Click to expand...

Lol. I'd consider it if my engine had more miles on it, but it only has 70k on it.

I think my friend has one. Let me ask him...
 
Hepar said:
Lol. I'd consider it if my engine had more miles on it, but it only has 70k on it.

I think my friend has one. Let me ask him...
Click to expand...

cool, thanks bro.. I think a wilson said he had a friend with one too if not.. Not sure though.
 
jmt2404 said:
cool, thanks bro.. I think a wilson said he had a friend with one too if not.. Not sure though.
Click to expand...

OK, just talked to my friend and he does have one. Problem is that it's f'in big and heavy. He said that it's over 300lbs and that the previous owner of it welded the legs on, so it doesn't break down. Therefor we would need a truck to get it down there.
 
Alright thanks guys. Looks like we might have to have another get together. what about this coming up weekend if we can get an engine lift. The only reason I need one is cuz I can't get at the crankshaft like I need to.. So I need to pull the motor and put it on a pallet or stand till I can get the rest of that bolt out. I also need to clean the top of the block so I can get a good seal when I reinstall. Or take the crankshaft out and replace it if need be.

SO does anyone know if I absolutely need to take my heads into a machinist and get them checked out?

Let me check on a few things before we finalize the date for the meet up. Still checking on prices for everything. And weighing my options to go v8 or not! There is an engine and tranny for 300 on craigslist right now for a 1uz motor. And the wife already gave me the ok to do a v8 swap..................... tempting....
 
jmt2404 said:
Alright thanks guys. Looks like we might have to have another get together. what about this coming up weekend if we can get an engine lift. The only reason I need one is cuz I can't get at the crankshaft like I need to.. So I need to pull the motor and put it on a pallet or stand till I can get the rest of that bolt out. I also need to clean the top of the block so I can get a good seal when I reinstall. Or take the crankshaft out and replace it if need be.

SO does anyone know if I absolutely need to take my heads into a machinist and get them checked out?

Let me check on a few things before we finalize the date for the meet up. Still checking on prices for everything. And weighing my options to go v8 or not! There is an engine and tranny for 300 on craigslist right now for a 1uz motor. And the wife already gave me the ok to do a v8 swap..................... tempting....
Click to expand...

Saturday is no good for me, but I could do Sunday.
 
I leave the country til christmas on thursday morning , been really busy lately , that said I can have a look for the cherry picker , I'm shipping the mirror tomorrow and covering the cost cause I'm a ***** , and hepar we replaced my inner tie rods right ? Can't seem to remember right now ...just finished the lower ball joints , lets just.say if .01-.1 is the tolerance I could have died at any moment, lol , like 10 mm in one of them !!!
 
Out of the country very nice... business or pleasure?

And I found one on craigslist for 100, I am going to pick it up tomorrow morning in gig harbor.
 
jmt2404 said:
lol.. Weird.. Like a secret spy? interesting...
Click to expand...

Man, you are treading in dangerous territory. You just don't know when to leave well enough alone. You're gonna turn up missing and we are all gonna blame the Enginehaus. I've already said too much...
 
Hepar said:
Man, you are treading in dangerous territory. You just don't know when to leave well enough alone. You're gonna turn up missing and we are all gonna blame the Enginehaus. I've already said too much...
Click to expand...

I say we start a poll to vote on what izz really does on his travels......... lol

Alright So I got my heads turned into a machine shop to get pressure tested and will get them back tomorrow ish.. I picked up the engine lift and an engine stand today at gig harbor for 175 bones!! going to start pulling the motor this weekend probably to get that crank bolt out..
 
i'm flying over there for some work, i got a pic of me on the job last time i was there.....
malestripper2.jpg

(thank god for safe search)



but really installing the pylon drilling tool i helped design
A350_XWB2.jpg

PRN14-SPIRIT-AEROSYSTEMS-TEST-PYLON_web.jpg

Airbus A350 - Wikipedia, the free encyclopedia
http://www.abjusa.com/brochures/nov_dec_09/Electro/Electro_Impact.swf

i can;t post pics of what i'm actually working on as i would have to kill you after i showed you, lol.... we do have a few space and military, and even space military projects going on atm...pretty cool stuff...

sorry i just like my job even if i do hate getting shipped out like this....lol
 
theizzardking said:
i'm flying over there for some work, i got a pic of me on the job last time i was there.....
malestripper2.jpg

(thank god for safe search)



but really installing the pylon drilling tool i helped design
A350_XWB2.jpg

PRN14-SPIRIT-AEROSYSTEMS-TEST-PYLON_web.jpg

Airbus A350 - Wikipedia, the free encyclopedia
http://www.abjusa.com/brochures/nov_dec_09/Electro/Electro_Impact.swf

i can;t post pics of what i'm actually working on as i would have to kill you after i showed you, lol.... we do have a few space and military, and even space military projects going on atm...pretty cool stuff...

sorry i just like my job even if i do hate getting shipped out like this....lol
Click to expand...

hhmmm..... Not sure if I buy it. Imma keep my eye on you cuz I really think your a :gun5::gun4::pimp::ak472::guitar3::flamethrwoer2::vader: in :hiding:....
 
I wonder too..I don't think it'll be anywhere near 14,000. I bet he doesn't sell it.

Wonder if it has a rear locker. I'm going to email him about it.
 
Last edited:
You must log in or register to reply here.

Similar threads

J
Tips Appreciated: 1998 Passenger Front Axle Replacement
Replies
8
Views
7K
davidch
D
J
1999 4Runner CV axle replacement
Replies
12
Views
4K
brillo_76
brillo_76
B
'02 Sport - high mileage and woes
Replies
1
Views
2K
spartacus
spartacus
wtfemery
Opinions wanted… what would you do?
Replies
13
Views
2K
JohnMc
J
mbumpus11
Cargo Area Drain Line (Idea for Coolers)??
Replies
1
Views
919
sigepbiker
sigepbiker

Members online

No members online now.
Total: 710 (members: 1, guests: 709)

Forum statistics

Threads
278,315
Messages
3,554,104
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top