So Cal 4Runner BS Thread

hey guys does this sound like a fair quote.. moog upper ball joints, install, and an alignment for $490??

Fair enough. You have to disconnect the UCA from the spindle, pull that pain in the ass long bolt out, press the old ball joint out, press the new ball joint in, then alignment. Although you really shouldn't need an alignment since you aren't changing the geometry (or even touching the lca/alignment bolts) but it never hurts to have done, especially if you're due for it.
 
Fair enough. You have to disconnect the UCA from the spindle, pull that pain in the ass long bolt out, press the old ball joint out, press the new ball joint in, then alignment. Although you really shouldn't need an alignment since you aren't changing the geometry (or even touching the lca/alignment bolts) but it never hurts to have done, especially if you're due for it.

Okay cool the price sounded about right to me I just wanted to double check.. The alignment right now is okay I think the toe is off a tad, but I am also going to be doing the lbj's myself so I figure an alignment wouldn't hurt.
 
Pelfreybilt Bumper?

Been eyeing the Pelfreybilt front bumper for awhile now. I want to go with them because they are local in SD and I can pick it up and not have to get it shipped. Anyone ever deal with them before?

Also, almost done with a custom full length aluminum roof rack :zoom:

tay4r-albums-custom+aluminum+roof+rack-picture41129-rough-set-up.png
 
Been eyeing the Pelfreybilt front bumper for awhile now. I want to go with them because they are local in SD and I can pick it up and not have to get it shipped. Anyone ever deal with them before?

Also, almost done with a custom full length aluminum roof rack :zoom:

tay4r-albums-custom+aluminum+roof+rack-picture41129-rough-set-up.png

I've been eyeing Demello for my front because they're in Riverside and I dig the looks of the 4th gen bumper. Buddy of mine just got a Pelfrey front and rear bumpers for his Tacoma and he's had nothing but good things to say about the company in general. Quite the wait time though, think it took 2 months to get bumpers, skids, and sliders.
 
[MENTION=143757]MisterNickG[/MENTION] [MENTION=123332]Drunner97[/MENTION] [MENTION=84801]AKmoney[/MENTION] [MENTION=137028]J - S&C Coach I work close to the UCI hospital

Let's plan to meet up for lunch?!
 
[MENTION=123332]Drunner97[/MENTION] [MENTION=84801]AKmoney[/MENTION] [MENTION=137028]J - S&C Coach I work close to the UCI hospital

Let's plan to meet up for lunch?!

I only get an hour for lunch, so I have to factor drive, food delivery speed, and eat time into that otherwise sure. Happy hour works too so long as I have a heads up to secure the babysitter.
 
[MENTION=143757]MisterNickG[/MENTION] [MENTION=123332]Drunner97[/MENTION] [MENTION=84801]AKmoney[/MENTION] [MENTION=137028]J - S&C Coach I work close to the UCI hospital

Let's plan to meet up for lunch?!

If I'm available - and most days I should be - I work near the Tustin Market Place (I-5 and Jamboree).
 
Oh man! Missing out all the planning up there. Maybe I should get something going here in SD area. I know there's a sep thread around here somewhere.
 
I work in Foothill Ranch but live in Fountain Valley so I could do a happy hour since Irvine would be on my way home.
 

Members online

Forum statistics

Threads
278,307
Messages
3,554,053
Members
248,016
Latest member
Advally Service

Trending content

Back
Top