BlackWorksInc
New member
I would pull the transmission pan, inspect and clean the intake screen, inspect and clean the magnets, reinstall the pan, and do a good transmission fluid flush.
I didn't catch what year your 4Runner was, so while you're doing that it wouldn't hurt to double check your connections and if your vehicle is a bit on the earlier side of the 3rd gen spectrum make sure the throttle cable to the transmission is set-up properly.
That'd be where I'd start first given what you said about it sitting and other stuff you've done so far. After than you'll probably have to narrow down on things if the issue is still there.
I didn't catch what year your 4Runner was, so while you're doing that it wouldn't hurt to double check your connections and if your vehicle is a bit on the earlier side of the 3rd gen spectrum make sure the throttle cable to the transmission is set-up properly.
That'd be where I'd start first given what you said about it sitting and other stuff you've done so far. After than you'll probably have to narrow down on things if the issue is still there.