SPC UCA Install/Initial Review

[honda_nos]

Got my SPC UCAs from Amazon.com and finally installed them this morning. Took me about 2 hours but I really took my time. No major issues. On breaking the ball joint from the spindle, I just used my BFH, 7 hits on RF and 9 hits on LF. LF took more because I'm right handed and it was a little awkward.

Set the caster setting on "D". Camber, I set in the middle which when I put the 4Runner down on the ground, shows negative camber.

Getting aligned as we speak, it already drove better (more straight, less wandering) on the way there.

 

[honda_nos]

New Alignment Specs:
LF RF
Camber -0.1 -0.3
Caster 3.4 3.9
Toe 0.09 0.08

 

[gaterose]

Nice, since I put em on mine drives much more like stock... Just need to get some softer springs now..

 

[zstampe]

Nice, since I put em on mine drives much more like stock... Just need to get some softer springs now..

Hmmmm worth the money for me to get them you think?

 

[polarpop]

I'll be putting a set of these on my 09 tacoma this week. Hopefully it will help too (OME springs and struts) If it works well on the taco, I'll get them for my 4runner. That amazon price is pretty good (cheaper than toytec...)

 

[honda_nos]

Drives great. The steering is a little off 12 o'clock so I am going to go back one more time to the alignment shop (I have lifetime alignment).

 

[azn-sensation]

Try fat bobs garage for a good price as well. Call for the deal because its lower that whats advertised on the website.