SRQ / True North Fabrications DIY Front Bumper Kit
- Thread starter SRQ-Runner
- Start date
JohnOfTheJungle
Member
It would be easy to modify to work with a body lift but it requires some cutting. You’d need to cut off the winch plate below the bend and raise it however high the body lift is and then weld in a bar to fill the gap. Then there are tabs that would need to be ground off that go into the blue circled slots because those parts will all be raised slightly.
We also will be offering bumpers that come adjusted for body lifts but they are a few months out. Want to get a few other bumper models designed first.
Just out of curiosity - what other models do you have coming down the pipe? Other 3rd gen variants?
JohnOfTheJungle
Member
Ordered! Ready to get my DIY on! :rockon: :guitar3: :flamethrwoer2:
SRQ-Runner
New member
Next in line is 2nd gen Tacoma
Thanks for the order! Let me know if you have any more questions
SRQ-Runner
New member
Through one of the inside light cutouts depending on the side of the lever. With a winch in place, you won't be able to use those cutouts for lights.
Last edited:
MN4runnerman
Senior Member
Just put down my deposit. Really excited! It was a tough decision between this and Coastal Off-road. Thanks!
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
SRQ-Runner
New member
First batch of 20 is now sold out! Thanks for all the orders. Can’t wait to see the install photos at the beginning of March!
SRQ-Runner
New member
All the parts are ready!
First bumper getting tacked up
First bumper getting tacked up
MN4runnerman
Senior Member
I put in my payment Friday night! Can’t wait! :hungry::hungry:
Justinpaddler
New member
How to order?
Hey just went to the ordering link from the first post, said out of stock, didn't see an alternative to order. Any way I can still get my hands on one of these?
Hey just went to the ordering link from the first post, said out of stock, didn't see an alternative to order. Any way I can still get my hands on one of these?
96RedRunner
Senior Member
When SRQ put this first batch up for sale I called them with questions.
Next batch is due out sometime in March was mentioned.
Get in touch with them see if that holds true, I'm sure SRQ will let us know through this thread.
SRQ-Runner
New member
[MENTION=142122]96RedRunner[/MENTION] is correct. The first batch of 20 sold out quickly. Next batch will be available in late March
96RedRunner
Senior Member
[MENTION=102266]SRQ-Runner[/MENTION], I like your design all the way. One thing comes to mind to add would be a wing to frame brace. Would be something I would look at upon installation, just thinking!
Justinpaddler
New member
Ok. Didn't know if there was a waiting list. Thx for the heads up.
Tyler James Inc
Senior Member
20 kits out there, and not one single production bumper all welded up and installed pics?! [emoji30]
MN4runnerman
Senior Member
I picked mine up Tuesday night. But I’m going to Florida tomorrow so I don’t have any time
Similar threads
