Stock height and rim offset help

[Notch46]

Hey guy,
Just picked up a 2016 SR5. Already have a 2015 Tacoma so decided to get a 4 Runner for the wife. I plan to get some rims and tires but can't decide on the offset.

Option #1 - Method Grid 17x8.5 with 0 offset 4.75" BS
Option #2 - Stealth Custom Series RAY10 17x8.5 with -10 offset 4.30" BS

Going to keep it stock height and run 265/70/17 KO2s. Wondering if I will have any issues with the 0 or -10 offset? If anyone has some pics of how much a 0 and -10 offset sticks out that would be great. Would like to get the tire flush with the fender. I read the sticky and I think either offset will work. But post up some pics!

Thanks.

 

[Brandonium]

You might be better off asking in this thread as there is much combined information available there.

http://www.toyota-4runner.org/5th-g...r-5th-gen-tire-fitment-guide.html#post1550444

 

[Notch46]

You might be better off asking in this thread as there is much combined information available there.

http://www.toyota-4runner.org/5th-g...r-5th-gen-tire-fitment-guide.html#post1550444

Thanks. Yeah I checked out that thread. Looks like it doesn't get much traffic.hwell: Figure I'd post it up here.

 

[Brandonium]

Also have a look here. Hopefully someone can chime in on the specific offsets you are inquiring about but I do know with stock offset and backspacing some have rub while others do not.

Most often the only way to know is to just do it. Crazy, I know.. But hey..at least it's suspenseful. :whoo:

http://www.toyota-4runner.org/5th-g...c-bfg-ko2-275-70r17-your-4r-without-lift.html

Thanks. Yeah I checked out that thread. Looks like it doesn't get much traffic.hwell: Figure I'd post it up here.