StrongArm 4286 Gas Charged Lift Supports review

I was mobile and the photos wouldn't post. Here you go.
<

Oem pins you can get at a junkyard or a dealer or go to ace or fastenal hardware and buy a groved pin or clevis pin that can take a quarter inch circlip. Also hillman bushing,
Rear Lift Strut Bushing Fix for $1.15 - Toyota 4Runner Forum - Largest 4Runner Forum.
AFA you want to use a smaller bolt as long as it doesn't interfere with the operation and functions properly then do it for now while you source the parts.
 
This video will give you a good idea what hardware you need to install the rear hatch struts.
<iframe width="560" height="315" src="https://www.youtube.com/embed/QFJrKn7uT4c" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
 
I was mobile and the photos wouldn't post. Here you go.
<blockquote class="imgur-embed-pub" lang="en" data-id="a/W0E2Urf" data-context="false" ><a href="//imgur.com/a/W0E2Urf"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>

My solution was that the strut you buy from Olathe comes with the bracket and the pins all as one unit, so I bought those instead of scouring a junkyard or buying a pipe cutter and making some of the materials myself. Easier, faster, less of a hassle.
 
My StrongArms are starting to lose their charge after about 6 years. Anyone know if it's worth having them rebuilt or just buy a new set?
 
Does anyone know the size circlip/retaining clip for these lift supports?



Thanks
I've used safety wire or a paper clip in a pinch, but there's so much pressure on the pins that they are not prone to falling out.

Ace hardware carries the clips, or something very close in size that I've pinched tighter

Sent from my Pixel 4 XL using Tapatalk
 

Members online

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Trending content

Back
Top