Stuck removing coil-over

[CraigRoberts]

There's three nuts holding the coilover to the shocktower

(Step 10 here: http://www.toyteclifts.com/images/stories/pdf_files/10upfj4r.pdf)

But I can't get at that third nut hiding in the back! How do you do it?

 

[Jetboy]

Just use a regular open end wrench. I don't think most sockets will fit that location. If you put the closed end of the wrench on the nut and use a hammer on the other end you can break it free if you can't get it without it. I don't think you'll be able to fit a cheater bar in there.

 

[Jono.ful]

get yourself a set of speed wrenches

 

[rochmpr]

get yourself a set of speed wrenches

This or an offset box wrench. Done.

 

[CraigRoberts]

Thanks Jetboy! I got it off

 

[CraigRoberts]

Oops, didn't see the other posts. Thank you! I will check into the wrenches.