Sunroof Leaking Near the Left of Sun Visor

FD7683

Member
My roof is leaking again and I thought I had fixed it already by running a weed wacker line through both drainage holes on the sun roof a while ago (which were clogged). The sunroof doesn't work on my truck so to clean them again I have to unbolt all 4 nuts to remove the window and clean them. Any other solutions to resolve the leak?
 
Last edited:
Register to hide this ad
My roof is leaking again and I thought I had fixed it already by running a weed wacker line through both drainage holes on the sun roof a while ago (which were clogged). The sunroof doesn't work on my truck so to clean them again, I have to unbolt all 4 nuts to remove the window and clean them again. Any other solutions to resolve the leak?

I don't have anything helpful to add but if you do chase drains again, could you post a few pics of the ordeal?

Thanks, man!
 
My roof is leaking again and I thought I had fixed it already by running a weed wacker line through both drainage holes on the sun roof a while ago (which were clogged). The sunroof doesn't work on my truck so to clean them again, I have to unbolt all 4 nuts to remove the window and clean them again. Any other solutions to resolve the leak?

[MENTION=120071]mtbtim[/MENTION] did a video where the sunroof drains were working fine but it was leaking from the seam joint in the moulding around the glass. Might help

https://www.youtube.com/watch?v=MVJW0XM2x24&feature=youtu.be
 
I unclogged my sunroof drains and it still leaked. Mine also doesn't open anyway, so I just sealed it off from the top with clear caulk. Hasn't leaked a drop since.
 
I unclogged my sunroof drains and it still leaked. Mine also doesn't open anyway, so I just sealed it off from the top with clear caulk. Hasn't leaked a drop since.

I might have to try this since I don't care about the sunroof operation. Thanks for the suggestion!
 
I might have to try this since I don't care about the sunroof operation. Thanks for the suggestion!

yea, I just got a tube of clear silicone outdoor caulk and caulked all around the edges. Kind of wish I had used more, but I'll re-apply if it ever leaks again.
 
Mines been leaking ever since i got it about four years ago. I used epoxy but it dried up after a year or so. Can't believe i didn't think about silicone considering I just sealed the garage sky lights at my parents house after they leaked all winter. That's next up when it's a nice day out.
 
Mines been leaking ever since i got it about four years ago. I used epoxy but it dried up after a year or so. Can't believe i didn't think about silicone considering I just sealed the garage sky lights at my parents house after they leaked all winter. That's next up when it's a nice day out.

let us know how it goes. i'll try to post a picture of mine. I should have smoothed it out more, but it was my first time!
 
I wouldn't try to seal it off, that's not a great solution, you can remove the glass if inoperable to clean drains, find out where it's leaking, for me with was a rear left drain tube that popped off the tray, I just removed the rear grab handle and rear 1/4 trim pryed the headliner don't gently and used a long pair of pliers and reattached. The headliner backer is water proof so a leak could show up anywhere depending on the angle you park.
 
redneck soultion with IVY LEAGUE style

I have had clogged drains --- which as you know creates a total mess.

If you decide to unplug the drains, you need to be careful to not damage the system / down pipes.
The best tool for this job is a length of Category 5 wire / cable - also called cat5 / or Ethernet cable. Just grab a 5 ft length that is not being used to connect your wife's computer / printer or WiFi. Snip off the ends- called RJ45's and you will find its a perfect diameter to slide down the drain tube...... and most important its flexible and easy to work with and does not present the risk of damage that a coat hanger or rigid metal wire or cable could.

If you plan to seal your sunroof --- not something I am recommending, using Marine grade materials, calking, silicon sealer will radically improve your chance of a meaningful result. They are designed to work in submerged conditions and are "flexible" during most of their life span.

hope this helps?
 
let us know how it goes. i'll try to post a picture of mine. I should have smoothed it out more, but it was my first time!

It’s dry after about a week of rain, maybe a few days less than that. My tube of silicone was broken at the base of the tip so it was a pretty rough time applying it but hey I’m dry now. Just don’t look down at it from above and we’re fine. Haha
 

Members online

Forum statistics

Threads
278,315
Messages
3,554,123
Members
248,016
Latest member
Advally Service

Trending content

Back
Top