Sway Bar Links - Eugene, OR

[Silver4RunnerIS300]

Got my links in. Thanks Mike.

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[MACT4R]

Nice! Can't wait for mine.

Sent from my SM-G920P using Tapatalk

 

[GGFerrier]

Sway Bar Links

I will NOT be taking any new orders until after my move is complete. This will most likely be sometime around mid July. If you guys need something, and cannot wait that long feel free to PM me. If I can squeeze in time to make some I will.



In the mean time please stay tuned to this thread. I'm going to post 3 different sets of links for sale next week. These links are not going to be the traditional yellow zinc color.



Mike

Can't wait to see what you've got for a 3rd gen. I tried to make my own bases on yours... That was a mistake, time to go for the real deal.

 

[Tacticalrunner]

Pm sent for order

Sent from my SM-G860P using Tapatalk

 

[MStudt]

I've got one set of custom links available at this time. The are the same strength as any of my other links, but these have a little spice to them. Rather than the traditional yellow zinc coating on the tube these are powder coated black. I've also used black jam nuts, black cone washers, and galvanized bolts. At this time I'm going to ask $220 for this full set with shipping. These particular links are for a 4th or 5th Gen, but I can switch them over to a 3rd Gen if needed.

Link specials are here!

 

[Cmpugh7]

I've got one set of custom links available at this time. The are the same strength as any of my other links, but these have a little spice to them. Rather than the traditional yellow zinc coating on the tube these are powder coated black. I've also used black jam nuts, black cone washers, and galvanized bolts. At this time I'm going to ask $220 for this full set with shipping. These particular links are for a 4th or 5th Gen, but I can switch them over to a 3rd Gen if needed.

Link specials are here!

I'll take a set of these...

 

[Jdholder]

Haven't received my links, paid on 5/25

Help!!

 

[GGFerrier]

Haven't received my links, paid on 5/25



Help!!

He said this on 5/24... Just sayin'

I will NOT be taking any new orders until after my move is complete. This will most likely be sometime around mid July. If you guys need something, and cannot wait that long feel free to PM me. If I can squeeze in time to make some I will.



In the mean time please stay tuned to this thread. I'm going to post 3 different sets of links for sale next week. These links are not going to be the traditional yellow zinc color.



Mike

 

[Jdholder]

He said this on 5/24... Just sayin'

Yep, but what you didn't know and couldn't have known is the PM conversation he and I had on 5/24 and 5/25.

No worries though, should have the links soon.

 

[90goldtsiawd]

PM sent for both sets of standard links for my '01. Hope I can still get these.

 

[MStudt]

I'm now taking more orders again for those that have been waiting. I do have 1 set of disco's for a 3rd Gen on hand, and they have red bushings.

If you want these let me know, and I can get them shipped out tomorrow.

Mike

 

[highcj5]

sent you a pm. jesse

 

[MStudt]

sent you a pm. jesse

Returned

 

[Okki]

[MENTION=98153]MStudt[/MENTION]

Got a question for you. After getting a Icon Stage 6 suspension on my 2010 Limited, and recently loosing the "spacer" that was my RCI bashplate, because I had a CBI front bumper installed, my front stabilizer bar makes contact with the front skid-plate.

It looks like I can create clearance by installing longer stabilizer bar links and pushing the rears (by the wheels) down, so that the curve between the frame rails gets rotated upward.

i.e. push this end of the stabilizer bar down:

So the bottom of the "smiley face" bar comes up:

(This is for a Honda Civic, but I couldn't find a good pic for a 4Runner.)

Do you have any experience with this, and if so, what length stabilizer-bar links would you recommend?

Thanks!
Okki

 

[MStudt]

All current orders are shipping today, and only a minimal wait for future orders.

 

[Jayjayb96]

How much are the standards vs discos for the 3rd gen shipped?

 

[MStudt]

How much are the standards vs discos for the 3rd gen shipped?

$200 VS $220 shipped to the lower 48.

For 95% of people standards perform just fine. I run standards, and haven't had any issues keeping up with people who don't run links at all. I'm placing a parts order on Friday if you need some links.

Mike

 

[Road Bull]

Order and funds sent. Looking forward to these links. They look stout!

 

[audiness]

Any chance of a black Friday special happening on these !?!?

 

[DanKendall6]

I'd be down to order some if there was a black friday or cyber Monday

Sent from my SM-G935V using Tapatalk