Tacoma TRD vs. FJ Suspesion

Buckles

New member
I searched around but could not find a solid answer on this.

I am currently running Fj shocks and springs with daystar spacers.

I was able to score shocks and springs off a TRD offroad tacoma (bilsteins) pretty cheap the other day.

I will for sure be putting the shocks on, but are there any advantages to the tacoma springs over the fj springs?

Will I see any difference in height/performance or are they basically the same?
 
Register to hide this ad
So you currently have about 4 to 4.5" total lift and you want more?

Consider this before you want.

Higher = more money. UCA, camber issues, axle angles it's a Pandora's box.

That is where I am at. I too have a very similar setup like yours. Except I did body lift to get more height.
 
So you currently have about 4 to 4.5" total lift and you want more?

Consider this before you want.

Higher = more money. UCA, camber issues, axle angles it's a Pandora's box.

That is where I am at. I too have a very similar setup like yours. Except I did body lift to get more height.

I don't necessarily want more lift. I just need to know what I can expect if I swap the FJ springs to the Tacoma springs.
 
I'm pretty sure the taco springs and the fj springs are the same. Not 100% sure, but with the lift kits and suspension components being the same..
 

Members online

No members online now.

Forum statistics

Threads
278,316
Messages
3,554,121
Members
248,016
Latest member
Advally Service

Trending content

Back
Top