For best transfer case health, you need to periodically (at least once/month) accomplish three things.
1) Cycle all the actuators so they don't get sticky and refuse to work when you need them. You can do this while stopped in your driveway.
2) Slosh the oil around on all the parts in the tcase and front differential to recoat them. As stated previously, after about one month the oil film starts to break down on stationary surfaces leaving them vulnerable to rust. This recoating process happens in the first hundred yards, or less, of driving in 4wd. Doesn't matter if you're in 4lo or 4hi.
3) Get the tcase and front differential oil hot enough to cook out most of the condensed water that will otherwise collect inside. This is probably the reason for the 10 mile recommendation. Particularly important if you live in a high humidity area of the country.
1) Cycle all the actuators so they don't get sticky and refuse to work when you need them. You can do this while stopped in your driveway.
2) Slosh the oil around on all the parts in the tcase and front differential to recoat them. As stated previously, after about one month the oil film starts to break down on stationary surfaces leaving them vulnerable to rust. This recoating process happens in the first hundred yards, or less, of driving in 4wd. Doesn't matter if you're in 4lo or 4hi.
3) Get the tcase and front differential oil hot enough to cook out most of the condensed water that will otherwise collect inside. This is probably the reason for the 10 mile recommendation. Particularly important if you live in a high humidity area of the country.
Last edited: