the very FIRST 4Runner ......
- Thread starter slacker
- Start date
RAD4Runner
Senior Member
She's a beauty! We'll always have room for her here in So Cal
slacker
New member
well , ordered some new parts .. and also building some ..
we're now building 3.4L swap HEADERS , and the first set is going on my Trekker .. also some other things are going to be done at the same time ...
so heres the list ..
headers
front pipe
eliminate cat (with rear O2 sensor simulator)
powder coated valve covers
new 318 injectors
walbro pump
METH/water injection
2.2 supercharger pulley
I think that's it
.
we're now building 3.4L swap HEADERS , and the first set is going on my Trekker .. also some other things are going to be done at the same time ...
so heres the list ..
headers
front pipe
eliminate cat (with rear O2 sensor simulator)
powder coated valve covers
new 318 injectors
walbro pump
METH/water injection
2.2 supercharger pulley
I think that's it
.
Footofgod
New member
parkay
New member
I finally got the headers back from my ceramic coater ..
I built the headers , but I cant do the ceramic coating yet , as it is cured at a much higher temp. then my powder coating oven will go . Cant wait to install them
.
dang... those look good
slacker
New member
well yeah .. finally found some time to work on my stuff .
woke her up out of hibernation today
got er' into the shop . I decided to only do the headers and pipes for now , and leave the powder coated pieces to do another day ..
got the stock manifolds and crossover , as well as the header pipe with the cat off .
and my NEW headers installed
it's just loose right now , but all the bolts are in .. SUPER happy with the fit , I did have to remove a couple of the exhaust studs in order to get the headers on , but all in all , I think it was easier to install these , then remove the originals very happy
.
woke her up out of hibernation today
got er' into the shop . I decided to only do the headers and pipes for now , and leave the powder coated pieces to do another day ..
got the stock manifolds and crossover , as well as the header pipe with the cat off .
and my NEW headers installed
it's just loose right now , but all the bolts are in .. SUPER happy with the fit , I did have to remove a couple of the exhaust studs in order to get the headers on , but all in all , I think it was easier to install these , then remove the originals
very happy .
slacker
New member
got the front header pipe , and front O2 bung built and welded .. connecting to the rear pipe and muffler .
rear o2 simulator installed , and everything bolted back together .
fired right up and sounds very cool and NO codes
didnt have the vid camera , but will do that for you interested parties
.
rear o2 simulator installed , and everything bolted back together .
fired right up and sounds very cool and NO codes
didnt have the vid camera , but will do that for you interested parties
.
slacker
New member
little maintenance on my trekker today an finally got her new jewelry installed
supercharger off , and removing the old ugly
on with the new ...
sorry for the crappy pics .. next show , I'll get some better ones
new 2.1" supercharger pulley , powder coated to match my other red accents
and now with the rest of the truck running royal purple synthetics , I decided to try there "purple ice" in my freshly replaced coolant
.
supercharger off , and removing the old ugly
on with the new ...
sorry for the crappy pics .. next show , I'll get some better ones
new 2.1" supercharger pulley , powder coated to match my other red accents
and now with the rest of the truck running royal purple synthetics , I decided to try there "purple ice" in my freshly replaced coolant
.
