TOYOTA TIS Techstream

I have not one clue what that means. That's why I'm on a 4Runner forum and not Apple or Windows :P
Then I'm afraid it is going to be no pick nick getting techstream to work. If you get too stuck, send me a PM and I'll try to get you going with VMWare Player and a VM I use for techstream.
 
Worked for me, i just disabled my seatbelt buzzer! Just thought I would add my input. I bought the below cable/software, but the software was jacked up on the mini cd for some reason so I downloaded version 7.12 off the web and it included instructions for how to activate it. download Link below for those of you needing the software:

Software 7.12 download + activation (does require XP32bit , VM will work):
http://mindwerksmedia.com/TechStream - EASY TS 7.11.010 Activation.zip


Here is the cable:New 2012 Latest V7.10.030 MINI VCI for TOYOTA TIS Techstream Fast Shipping | eBay

dead link
 
Do you have a 64 bit or 32 bit machine?

64 bit is incompatible with the driver.

Hello everyone, not sure if it's a news but mine is latest version 8.20.019 and I can confirm it works on win7 64bits, the setup it's totally different from what I read on forums, this is screenshot with installer: http://imageshack.us/a/img534/2572/8szr.png
and I bought on ebay from a romanian seller as it was close to my country.

it doesn't give the error like I saw for others when clicking on Setup -> Check for updates, it reports back that I do have latest version so I assume it's not modified someway to give me that impression

cheers!
 
Hello everyone, not sure if it's a news but mine is latest version 8.20.019 and I can confirm it works on win7 64bits, the setup it's totally different from what I read on forums, this is screenshot with installer: http://imageshack.us/a/img534/2572/8szr.png
and I bought on ebay from a romanian seller as it was close to my country.

it doesn't give the error like I saw for others when clicking on Setup -> Check for updates, it reports back that I do have latest version so I assume it's not modified someway to give me that impression

cheers!

Do you have a download link to v8.20.019, or can you upload yours somewhere? If this has the correct W7-64 drivers then it would seem to streamline the installation for all involved...

Rock On! :cool:
 
Do you have a download link to v8.20.019, or can you upload yours somewhere? If this has the correct W7-64 drivers then it would seem to streamline the installation for all involved...

Rock On! :cool:

I've been searching for it online.... found a couple forums that might have it listed. I'll post back if I get something. Definitely would be much easier with a Windows 7 compatible version!
 
Dropbox, Google Drive, Box.net..........bit torrent

lol thanks.... I already use Drive for personal/business stuff, but I need to create just a link to the file that someone else can follow to DL. I'd also prefer it not attached to my email address for obvious reasons.

I created a torrent (and am currently seeding), but I can't even post the file here.... unless I try the old add .txt trick (not sure what the forum rules are though)

Does this link work?
Free large file exchange service without size limits

Please note that I have not yet tried the software and provided the link as-is.
 
going to get in on this testing soon. Are there locations where people have been discussing the various customizable fields?
 
Sorta...but no. I'm tracking those options. I'm wondering if there is a deeper dive list of features. I saw a screen shot around page 3 or 4 that spoke to VSC and those type of systems. Wondering what options are available to adjust driveability.

None that I have seen. Everything besides the normal "dealer programmable" options are informational or test/reset procedures.
 
None that I have seen. Everything besides the normal "dealer programmable" options are informational or test/reset procedures.

Can you tell what's going on in this screenshot from earlier in the thread?

Finally got the cable last night. its running on my mac with parallels desktop windows 7 32bit. Im out on my lunch break, fiddling around with the software :hungry:
Screenshot2012-09-14at121416PM.png~original
 
Hello everyone, not sure if it's a news but mine is latest version 8.20.019 and I can confirm it works on win7 64bits, the setup it's totally different from what I read on forums, this is screenshot with installer: http://imageshack.us/a/img534/2572/8szr.png
and I bought on ebay from a romanian seller as it was close to my country.

it doesn't give the error like I saw for others when clicking on Setup -> Check for updates, it reports back that I do have latest version so I assume it's not modified someway to give me that impression

cheers!

I can run the software, but still can't get the cable to connect. How did you connect to the vehicle using a 64 bit machine? So frustrating. I was hoping to run native on 64 bit. Can anybody else confirm 8.20.019 on a 64 bit OS?

Edit - ended up installing a VM to WinXP.
 
Last edited:
Geez, I'm beyond frustrated with this. I've installed the software 8.20.019, installed the VCI driver and got the red light. When I click connect to vehicle, I can't get past the registration key. What am I doing wrong? I have 3 codes, and none of them work. HELP!!! I should say that I'm running XP through a virtual session.

[Registration - NA]
caacf490093c0cca6b6b148b84362f6fbfa092b0fe31ea
d2307c4ceff1997f9ed19353507f177c30001307260416
70a43662a67870491145543a7042df9fa9fbc0aaf5d686
 

Members online

No members online now.

Forum statistics

Threads
278,312
Messages
3,554,083
Members
248,016
Latest member
Advally Service

Trending content

Back
Top