Toytec superflex coil setup

[runner823]

So I just installed the boss kit with the superflex coil. I noticed that shock is bottomed out with runner sitting on its own weight. If you have this setup please post a pic. of the rears. I want to know if this is normal. It just don't look right. It just to have no shock travel.
I will be calling Toytec tomorrow about this concern.

 

[SL28]

What shocks are you running? Bottomed out ... Completely compressed? Extended?

 

[runner823]

What shocks are you running? Bottomed out ... Completely compressed? Extended?

toytec boss lift kit w/ superflex coils and extended travel rear Bilstein.
The Runner just parked at a level ground with no additional weight-stock!
The shocks are bottom out. I would post a pic. But I've not figured out how to do that. I just wish I can just up load pic. from my computer like face book without all the added steps.

 

[shootmymime]

toytec boss lift kit w/ superflex coils and extended travel rear Bilstein.
The Runner just parked at a level ground with no additional weight-stock!
The shocks are bottom out. I would post a pic. But I've not figured out how to do that. I just wish I can just up load pic. from my computer like face book without all the added steps.

Hey you want to text me a pic. 816-797-68 four four.

I've got that and I'm running el cheepo auto parts store gas shocks from a land cruiser. Work amazing

 

[runner823]

Hey you want to text me a pic. 816-797-68 four four.

I've got that and I'm running el cheepo auto parts store gas shocks from a land cruiser. Work amazing

I'll text u that pic sometime tomorrow.

 

[Mahalas]

Whats the part number on the shock?

 

[TheArkMaster]

I can post a pic in the morning of my setup.

 

[Slow_T4R]

This is the superflex with extended bilsteins in my driveway. Do you need a closer shot?

 

[TheArkMaster]

This is the superflex with extended bilsteins in my driveway. Do you need a closer shot?

Are you running a BL?

 

[A.Wilson013]

Are you running a BL?

If he is, it's a little one.

Looks tall due to the lack of rear bumper, tow package, and spare tire.

 

[Slow_T4R]

Are you running a BL?

If he is, it's a little one.

Looks tall due to the lack of rear bumper, tow package, and spare tire.

You are correct sir. No body lift. I was trying to find a shot of the back that showed the most suspension.

 

[TNRunner99]

I would have to see what you are talking about. The coils must be installed wrong for that to happen. With the cones installed in my springs I still have a ton of room before they would ever make contact with the rear axle. Heck they probably couldn't anyways.

 

[kolelt]

This set up should be good. Many people run bilstein 5100 with superflex even toytec recommends those shocks with those coils. I'm installing mine this Friday. Show us some pics. !!!!

 

[lowlinkin]

I'm running the same setup and have been for the last 6mths and have had zero issues. Show a close up shot of just one side so we can see how its installed.

 

[T4Ryota4life]

Here is a pick of my rear setup. Superflex with extended Bilsteins.

 

[vanion2]

Wow. That undercarriage looks like it just rolled off the show room floor.

 

[tre9er]

Wow. That undercarriage looks like it just rolled off the show room floor.

I know, I'm jealous. I want a hydraulic lift so I can more easily get to mine. Or a pit. Lying on my back with an angle grinder doesn't sound like the most fun I can have on a Saturday.

 

[kolelt]

How do you guys this the 51000 handle off roading ? The 5100 in the back and the 5100 in front. Flex.... Bumps.... Ect

 

[lowlinkin]

yeahh mines not near as pretty underneath but the setup is the same.
http://www.toyota-4runner.org/membe...0-extended-5100s-toytec-superflex-springs.jpg

 

[kolelt]

yeahh mines not near as pretty underneath but the setup is the same.
http://www.toyota-4runner.org/membe...0-extended-5100s-toytec-superflex-springs.jpg

No extended bump stops ?