TRD Cold Air Intake - 2015 4Runner

[rpontbriand]

Thought I saw this somewhere on this board so sorry if I missed it ...

I am looking for the TRD cold air intake for my 2015 TRP but shops I have seen online only have them through 2013. Is this one of the TRD parts now on hold by Toyota or am I missing something?

Thanks

 

[enjanir]

Thought I saw this somewhere on this board so sorry if I missed it ...

I am looking for the TRD cold air intake for my 2015 TRP but shops I have seen online only have them through 2013. Is this one of the TRD parts now on hold by Toyota or am I missing something?

Thanks

The intake will fit all 5th gens however if I recall correctly the 14-15 have an added air pump so the instructions can't be followed 100%. I plan on installing the intake on my 15 limited.

 

[3wbdriver]

I can't vouch for the TRD version, but I put a 2012 AFE-CAI in my 14 and all I had to do differently was reverse the bracket for the horn and move it back a couple inches to a different threaded hole on the fender wall.

 

[sandcrawler]

Thought I saw this somewhere on this board so sorry if I missed it ...

I am looking for the TRD cold air intake for my 2015 TRP but shops I have seen online only have them through 2013. Is this one of the TRD parts now on hold by Toyota or am I missing something?

Thanks

installed in 2014 TE... http://www.toyota-4runner.org/5th-gen-t4rs/85960-how-guide-trd-cai-installation-7.html#post1925586

 

[stir_fry_boy]

Anyone know the cheapest place to get one? So far Amazon is $386

 

[dhylander]

The intake will fit all 5th gens however if I recall correctly the 14-15 have an added air pump so the instructions can't be followed 100%. I plan on installing the intake on my 15 limited.

13's have the air pump as well.

 

[youngwas]

Installation Video

I bought TRD parts from Camelbak Toyota and wire loom, vacuum hose, silicon spray, silicon paste, zip ties from AUTOZONE & O'REILLY.

(1 of 3) TRD Cold Air Intake CAI Installation. 2017 4Runner TRD PRO Cement.
<iframe width="560" height="315" src="https://www.youtube.com/embed/WNR_ASVXbSo" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

(2 of 3) TRD Cold Air Intake CAI Installation. 2017 4Runner TRD PRO Cement.
<iframe width="560" height="315" src="https://www.youtube.com/embed/s0BjSytS20E" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

(3 of 3) TRD Cold Air Intake (CAI) Sound. BEFORE & AFTER. 2017 4Runner TRD PRO Cement.
<iframe width="560" height="315" src="https://www.youtube.com/embed/XslyCqmw50A" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

 

[Dropzone]

I bought TRD parts from Camelbak Toyota and wire loom, vacuum hose, silicon spray, silicon paste, zip ties from AUTOZONE & O'REILLY.

(1 of 3) TRD Cold Air Intake CAI Installation. 2017 4Runner TRD PRO Cement.


(2 of 3) TRD Cold Air Intake CAI Installation. 2017 4Runner TRD PRO Cement.


(3 of 3) TRD Cold Air Intake (CAI) Sound. BEFORE & AFTER. 2017 4Runner TRD PRO Cement.

How many threads did you make the same post in? 25+?!? Wholly crap

 

[youngwas]

How many threads did you make the same post in? 25+?!? Wholly crap

haha..sorry.. I didn't know it's going to bump all the post to the top..

I just wanted to share and tell other 4runner owners that it is easy to install and encourage them to mod..that's all.. no bad intentions here...

 

[Capt.Canuck]

haha..sorry.. I didn't know it's going to bump all the post to the top..

I just wanted to share and tell other 4runner owners that it is easy to install and encourage them to mod..that's all.. no bad intentions here...

OK, then perhaps you can delete all the unnecessary and duplicate spam posts?

 

[Coondawg78]

The intake will fit all 5th gens however if I recall correctly the 14-15 have an added air pump so the instructions can't be followed 100%. I plan on installing the intake on my 15 limited.

Does anyone know the exact part number of the TRD CAI for the 2015 4runner SR5? Lots of confusing part numbers going around when you search this. Also, any mods need to be done or is it as simple as everyone is saying?

 

[jthoms1]

Does anyone know the exact part number of the TRD CAI for the 2015 4runner SR5? Lots of confusing part numbers going around when you search this. Also, any mods need to be done or is it as simple as everyone is saying?

Quote:
Originally Posted by Snacks View Post
For anyone looking to purchase and install the TRD Intake, the cheapest place to purchase each part individually is through Conicelli Toyota.

Conicelli Toyota of Conshohock | Genuine OEM Toyota Parts

Below are the part numbers you'll need.

PTR03-35090-AA
PTR03-35090-AF
PTR03-35090-AC
PTR03-89100-AA
PTR03-89100-AB
PTR03-34071

The total BEFORE shipping and AFTER using (EBAY10) as a discount code is $202.14.
Thank you for this advise, the discount code still works. I guess even someone from Chicago is not all that bad after all.
Got all the above for $210 + $16 shipping.
__________________

I just ordered from the same dealership using the eBay10 code yesterday and it was $226 shipped.

Here is the thread this is from...it’s been running for years - How-To-Guide (TRD CAI) Installation

 

[mteolus]

I read somewhere that this mod did nothing other than to make the engine noisier.

 

[JP421]

I read somewhere that this mod did nothing other than to make the engine noisier.

There is not much to these engines so it seems like that would be the case. That CAI does not look like it is all that different from stock.