Singtoe
New member
So are you keeping it 2wd then?
These might help a little if you havent found them already.
Lexus 4.7 Swap LOTS OF PICS! - TTORA Forum
The wiring is questionable. I would think it should be relatively easy.
Over on Ih8mud there are a few guys that swapped the 2uz in an 80 so I think it should be somewhat straight forward. This swap is VERY clean and very well documented. Project - EffjJay Eighty - 2UZ powered
I almost kept an 80 for this specific purpose. I think it might be a little easier and more difficult at the same time. The 2uz should be able to bolt to the 340 in the 4runner making the drivetrain less of a hassle, hopefully, but the 80 has a much much bigger engine bay to work with unlike the tightness of the 4runner.
I was talking with a buddy about this idea before I even saw your post. Im excited about this and I hope you are able to document it all the way through.
I am going to make it 4wd. Thanks for the links. The first one is totally useless. He did not document anything as far as his conversion goes. The second link, with the Cruiser is long and quite involved. Especially with the trans swaps he did and what not.