97BlackAckCL
Elite Member
I like the idea, but don't want to drill or screw into my center console
Victory 4x4 New Product Prototyping (Armor & Accessories)
- Thread starter victoryrunner
- Start date
Victory 4x4
Official Vendor
The rails are 3" wide and there is about 1" between the bottom of the rail and the roof. If you need more room to get hardware on, one side is notched so they just drop on and off the bolts in the rail. They sit just above the factory rails which is slightly below the antenna. If you are running a tent or traction boards it won't be an issue because they are spaced up. The hardware is zinc coated.
Attachments
agentcross
New member
Great I’ll hold off! Thanks so much
Man these would be awesome!!!! It would be great to add Mille attachments like for tissues or even a cup holder. I hate having to open the center console every time my daughter needs a tissue! Which is all the time hahahah
Sent from my iPhone using Tapatalk
themudbabe
New member
I would love a banana holder. The Molle grid would make an excellent mounting point for radio mic and maybe a handheld too, yes?
Terrapod
New member
[MENTION=320865]Victory 4x4[/MENTION]
Product suggestion: How about a weld-on swing arm that only cuts a hole in the stock rear bumper? Something like this:
my custom tire/fuel carrier build using stock bumper
Product suggestion: How about a weld-on swing arm that only cuts a hole in the stock rear bumper? Something like this:
my custom tire/fuel carrier build using stock bumper
Victory 4x4
Official Vendor
Thanks for the suggestion! I'll pass this along.
Terrapod
New member
Victory 4x4
Official Vendor
Jetboy
New member
I would second this for sure.
How to make some improvements:
Use some type of universal mount flange that sits as flush as possible to the bumper cover. It flexes so of course there needs to be some clearance where you cut through the bumper cover. But it would be great to have the option to bolt on the swing out assembly or unbolt and bolt other fixtures into the same spot. Thinks like a nice swing out for bicycles, or whatever else you wish to carry back there, or just to remove it for daily driving.
I'm more of a function over form guy. So in the interest of keeping weight down and utility high - put the tire down and on the side where the visibility is least impacted and the shortest arm can be used. That would keep the hinge forces lower and allow for lighter weight assembly. I don't think there is anywhere in the USA where you'd want double spare tires like you would in Africa or Australia, but the way Kaymar does it is the best I've seen.
Personally I wouldn't move my spare out of the OEM location. However I would like to have a swing out carrier for other stuff like fuel.
Just the other day I found myself wondering if you were going to make a roof rack.
Any options for integrating a slim light bar that won't get in the way of any cargo on top?
Victory 4x4
Official Vendor
Yes, the front fairing will be available with or without a light bar cutout. :thumb3:
thegreatchangsby
New member
Will there be a final seal between the rack and the roof to cut down on noise? How wide are the crossbars? I assume the mounting brackets are steal vs bent aluminum like your competitors? I can't wait to see the final design.
I don't currently own a 4runner, as i'm waiting to see the new 2020's to come out before I pull the trigger. I've been creeping around the forums to get ideas of mods and accessories.
I'm thinking my 4runner is going to be a Victory 4x4 poster, molle racks, sliders, bumper, and now this rack.
I don't currently own a 4runner, as i'm waiting to see the new 2020's to come out before I pull the trigger. I've been creeping around the forums to get ideas of mods and accessories.
I'm thinking my 4runner is going to be a Victory 4x4 poster, molle racks, sliders, bumper, and now this rack.
halflife78
New member
hmmm....once that roof rack is done I might just need to buy everything you make for a 4Runner at once.
halflife78
New member
Also, I am looking for something that adds minimal height...that looks pretty low, any guesstimation how much height it may add over the stock roof rail things?
Victory 4x4
Official Vendor
The front and rear fairings will be adjustable so you could add some edge trim and press it all the way against the roof if you'd like. The whole rack will be aluminum but the mounts will be steel. The rails will be 2" wide extruded aluminum.
Look forward to seeing your 4Runner!
Victory 4x4
Official Vendor
Maybe 1-1.5"? I'll check when we install the final.
CRFofiddyF
New member
will you guys be making ladders by any chance?
Thanks
Thanks
ScarfaceT4R
New member
Really love & want to pull the trigger on 3 of those crossbars. Anyone have any link to a good lockable maxtrax or jack/shovel mount that would adapt to these Victory 4x4 crossbars??
Thnx!!
Thnx!!
ScarfaceT4R
New member
Bump.
Nothing anyone can suggest for these? Maybe more of a RTT type of rack system, or larger items? What are people throwing up there?
