What are these plugs for?

well I hope that all the plugs are there because I think the heated cloth seats will work...my buddy has a new VW with heated cloth seats so hopefully its a matter of getting my hands on the elements and figuring out how they're installed on the limited models...although by the time I get off my yass to figure this out it'll be spring...ah well, at least I'll be ready for next winter :)
 
.
 

Attachments

  • wiring.jpg
    wiring.jpg
    112.1 KB · Views: 386
Last edited:
CJ3Flyr said:
Maybe... VW, Isuzu and I believe Honda have offered seat heaters with cloth seats.

More than fire I wonder about spilling a beverage and adding some tingle to the warm feeling:lmao:

:cheers:

You're correct my family used to have a VW Jetta with cloth, heated seats, I would like to think there wasn't a risk of setting the seat on fire. Anyway, both cloth and leather seat covers normally have the same foam padding between the heating element and seat fabric, so the exterior material doesn't actually touch the heating coils and should not cause a greater fire risk either way.

And XREAS does not imply air suspension. I am interested to know what the extra harnesses are.
 
CJ3Flyr~

Wow, you are all over this forum.

First, I tried your V6 anti-tick mod and I noticed absolutely no difference. SO, I wanted to thank you for nothing. HAHAHHAHA But like you, I am going to consider this a placebo effect and run with it.

Secondly, you are more than likely right on Toyota just putting these plugs in every vehicle.

By the way, oatmeal rasin cookies are in the oven. Be ready in ten min.
 
the outermost blanks have the seat heater switches in them. never saw anything else there except the DAC switch.
 
sorry, should have read all pages before posting.
From r32's diagram I can see plug d5=DAC switch / h12 ride height conrol switch and h19 ride height mode switch.
I was in a 4rnr today with the seat heaters in the outside positions, though not listed on r32's diagram.
 
sant6236 said:
CJ3Flyr~

Wow, you are all over this forum.

First, I tried your V6 anti-tick mod and I noticed absolutely no difference. SO, I wanted to thank you for nothing. HAHAHHAHA But like you, I am going to consider this a placebo effect and run with it.

Secondly, you are more than likely right on Toyota just putting these plugs in every vehicle.

By the way, oatmeal rasin cookies are in the oven. Be ready in ten min.

Excellent! Yummm.

The valve isolation trick I picked up at the FJC forum... I am undecided on that one too but it can't hurt... Oh well. Ya win some you lose some and the amount of money and time blown on that one is far less than the HHO's that were all the rage last summer:lmao:



:cheers:
 
davido said:
sorry, should have read all pages before posting.
From r32's diagram I can see plug d5=DAC switch / h12 ride height conrol switch and h19 ride height mode switch.
I was in a 4rnr today with the seat heaters in the outside positions, though not listed on r32's diagram.

seat heaters are actually there, in the second diagram, S4.
 

Members online

Forum statistics

Threads
278,312
Messages
3,554,085
Members
248,016
Latest member
Advally Service

Trending content

Back
Top