What did you do to/in your 5th Gen today?!

Right on! Where did you stay? We usually stay at the Cambria pines lodge, but rented a house with my wife's family this time.

Oh nice! A friend of ours recommended the Blue Bird Inn, so we stayed there. We usually just drive right through but since it was kind of close to our anniversary, my girlfriend and I decided to take our time and stay the night. It's a cool little town never really spent much time there before. Was also told to go to Linn's for breakfast, which was delicious!
 
so this fuse box has a connect for ground that then has one wire that goes to the ground?
You ground the Blue Sea fuse block to a good ground point in the truck. You still have to ground your individual accessories. If you do a search of Blue Sea fuse block you will find lots of ideas from other T4R's as well as Tacomas. Tacoma engine bay is similar to T4R...
 
Last edited:
Oh nice! A friend of ours recommended the Blue Bird Inn, so we stayed there. We usually just drive right through but since it was kind of close to our anniversary, my girlfriend and I decided to take our time and stay the night. It's a cool little town never really spent much time there before. Was also told to go to Linn's for breakfast, which was delicious!

Please tell me you bought their jam to go, they have the best jam!!!

There's a couple places that are delicious out there if you go back, PM me i will give you some recommendations :)
 
Went for a little ride on the SxS....its the first time the 4runner has been muddy, or actually been in mud.

IMG_2203.jpg~original

IMG_2197.jpg~original
 
Got some new wheels and tires

After much deliberating, waiting and utilizing you fine forum members (thanks [MENTION=66316]1engineer[/MENTION]) I went with the ProComp 7005 with BFG KOs 265/70/17s. sorry about the crap pictures.
 

Attachments

  • IMG_1955.jpg
    IMG_1955.jpg
    125.7 KB · Views: 816
  • IMG_1956.jpg
    IMG_1956.jpg
    124.6 KB · Views: 813
Please tell me you bought their jam to go, they have the best jam!!!

There's a couple places that are delicious out there if you go back, PM me i will give you some recommendations :)


Awesome thanks! I didn't get the Jam to go (should have) but I did eat a lot and it was amazing!
 
Did oil change number 3. But this time made a giant leap forward and scared up a length of plastic tubing for the oil filter drain to pee through. "Worked a treat" as the Aussies would say.
 

Attachments

  • oil.jpg
    oil.jpg
    91.6 KB · Views: 741
my tires were purchased through discount tire, the wheels through autoanything and after my rip off dealership quoted me $150+ to do the install i had costco do it for $59
 
I believe I have the same rims and the original lugs work fine , the washers on there are a non issue and they have the correct cone bevel where they mate to the rim , I do the change over myself and torque to 80 ft/lbs a few shy of the spec on the low side (allowing for possible wrench intolerances and the storys of snapped studs ) and always do them before the weight of the vehicle is on tire . Do the same for every vehicle I got .

 
Last edited:
Fog bezels

Not really a big deal (to me it is) painted them flat black . Did it kinda back assward 2 coats of black then clear coat then 1 of flat again IDK why but ! Door handles next :crazy:
 

Attachments

  • 20141213_082151.jpg
    20141213_082151.jpg
    141.3 KB · Views: 734

Members online

No members online now.

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Trending content

Back
Top