What did you do to/in your 5th Gen today?!

My valentine and I did a little snow hunting in the Appalachians today....

KH2L8691.jpg

KH2L8767.jpg

We were stoked to link up with jls_kneecaps today as well!

KH2L8709.jpg
 

Attachments

  • KH2L8691.jpg
    KH2L8691.jpg
    137.7 KB · Views: 816
  • KH2L8767.jpg
    KH2L8767.jpg
    139.3 KB · Views: 869
  • KH2L8709.jpg
    KH2L8709.jpg
    142.9 KB · Views: 854
Swapped out a couple more lights with LED


Someone mentioned this long time ago, but sure looks like the licence light housings are indeed factory-installed incorrectly, judging by the R in left position and L housing on the right side. Also, the lights point away from the plate, not toward it.
 
Let my wife drive it, it was snowing and I suggested she not go out, she needed a shopping fix. She said she passed a van spun out and three other cars trying to get up the hill spinning away. I guess she didn't have any trouble, and that is why I have a Limited.

"Honey just get in it and drive."
 
Someone mentioned this long time ago, but sure looks like the licence light housings are indeed factory-installed incorrectly, judging by the R in left position and L housing on the right side. Also, the lights point away from the plate, not toward it.

Actually, if you really look at the lights they are tilted towards the plate. They are only pointed away if you feel the majority if light is emitted from the tip of the halogen bulb.

The bigger issue is that there isn't a reflector in there. If there were, much more of the light would be directed towards the plate.

Now with some LEDs, a lot of the light is emitted from the end of the bulb. In those cases, it would be beneficial to swap the housings to the opposite side. Unfortunately I don't believe there is enough wire to allow for this.
 
Drove to Folsom Lake again. What a pleasant surprise: there is actually lake over there.
Looks like these couple weeks of rain did the trick and filled up the reservoir over 50% its capacity.

The last time I was there the lake was dry to 17% total capacity. People were actually boating where this picture was taken:

I gotta get out there and check it out. I'm just over in roseville. Last time I was there it was crazy how low the water was.
 
Went out to Guadalupe Mountains and did some off-road exploring. Let my wife drive and she somehow went straight into a couple of small boulders. She felt so bad but I wasn't mad at all. It was bound to happen.

Any guesses on cost of repairing the damage? I haven't taken it to a body shop yet.
 

Attachments

  • image.jpg
    image.jpg
    136.7 KB · Views: 556
You can't repair that plastic, you will need to replace the entire cover. Call the dealership and ask them for a price.

just smooth out that rough part, buff it out as much as possible, and touchup the scrapes with a paint pen and roll with it until you get more damage.
 
You can't repair that plastic, you will need to replace the entire cover. Call the dealership and ask them for a price.

just smooth out that rough part, buff it out as much as possible, and touchup the scrapes with a paint pen and roll with it until you get more damage.

I figured the entire bumper would need to be replaced. Maybe time for aftermarket bumper....:hungry:
 
hey [MENTION=120209]tigger[/MENTION] when did you switch out your wheels and tires for the AT3's? Back to stock size too?
 
hey [MENTION=120209]tigger[/MENTION] when did you switch out your wheels and tires for the AT3's? Back to stock size too?

Just got them about a week ago. Tires are the same size. The M/Ts just looked bigger.

The black wheels seemed to get lost in the tires. I really like the looks of the gun metal and the easy to clean design of the MK6's. Plus with the weight savings of the tires, I have gained back almost 2 mpg. Very pleased with the new set up.
 
Back to Everglades NP - PIC HEAVY

Yesterday actually…we went back out to Everglades National Park. Got a few animals and did some pre-running on the few trails that are out there. Nothing that even required 4WD, but I went through all the motions anyway - gotta keep that stuff in use!
 

Attachments

  • P2140010.jpg
    P2140010.jpg
    138.6 KB · Views: 808
  • P2140032.jpg
    P2140032.jpg
    140.4 KB · Views: 813
  • P2140067.jpg
    P2140067.jpg
    214.8 KB · Views: 837
  • P2140118.jpg
    P2140118.jpg
    119.8 KB · Views: 818
  • P2140122.jpg
    P2140122.jpg
    125.1 KB · Views: 821
  • P2140134.jpg
    P2140134.jpg
    133 KB · Views: 844
  • P2140164.jpg
    P2140164.jpg
    139.1 KB · Views: 835
  • P2140180.jpg
    P2140180.jpg
    151 KB · Views: 845
Yesterday actually…we went back out to Everglades National Park. Got a few animals and did some pre-running on the few trails that are out there. Nothing that even required 4WD, but I went through all the motions anyway - gotta keep that stuff in use!


Cool photos!
 
Finally got around to getting some lights installed. Up on the gobi I have a 17.2" then 2 x 6" next to it. 2 more 6" in the rear and ditch lights on the CBI brackets.

Most likely will be swapping out the 2 x 6" on the front for 2 x 10". All of the lights are chinese knock offs, can't justify the cost of rigids when I only need the lights a bunch of times a year (maybe in the future).
 

Attachments

  • IMG_1243.jpg
    IMG_1243.jpg
    71.4 KB · Views: 800
  • IMG_1242.jpg
    IMG_1242.jpg
    64.2 KB · Views: 803
  • IMG_1246.jpg
    IMG_1246.jpg
    47.6 KB · Views: 798
Just drove around in the ice and freezing rain watching other people play slip & slide.:hello:
 

Attachments

  • IMG_5815.jpg
    IMG_5815.jpg
    125.2 KB · Views: 796
Rear Diff Breather Mod

After a year of my parts sitting in the garage I finally got around to installing the rear diff breather mod. And while I was add it my mechanic decided we should remove the lower plastic valance to better expose the factory recovery points.
 

Attachments

  • IMG_20160215_101838348.jpg
    IMG_20160215_101838348.jpg
    130.3 KB · Views: 701
  • IMG_20160215_101850290.jpg
    IMG_20160215_101850290.jpg
    127.2 KB · Views: 720
  • IMG_20160215_102507975.jpg
    IMG_20160215_102507975.jpg
    137 KB · Views: 729
  • IMG_20160215_103152313.jpg
    IMG_20160215_103152313.jpg
    136.4 KB · Views: 718
  • _20160215_124320.jpg
    _20160215_124320.jpg
    137.5 KB · Views: 768
  • IMG_20160215_110209931.jpg
    IMG_20160215_110209931.jpg
    137.7 KB · Views: 757
Saturday & Sunday

Saturday I installed the Schrockworks dual battery tray & relocated the air pump.
Sunday I started working on the wiring upgrade from bumper2bumper. Ran in to a few issues and working with Bill to straighten it out. Removed the alternator which was fun, had to take the tire off to get to the bolt in the rear of the alternator.
 
Saturday night my girlfriend and I learned how quickly we could egress a campsite by simply collapsing our tent, with sleeping bags, pillows and delfated air mattress still inside, and shoving in the back of the truck.

Misjudged the weather and were under-prepared for how cold it got.
 

Members online

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Trending content

Back
Top