What did you do to/in your 5th Gen today?!

[Hemoglobin]

Kind of modest compared to some armor!

I have in all my parts. So I scheduled my Toytec BOSS lift, TC UCA, and diff drop to be installed Jan 17th-18th.

Also got some work on the fiberglass sub box in. Cut the weird bar where the JBL sub thing would be and got the base layer down. Later this week I'll do the final 2 layers before completing the form/top and filling it all in. After that it's a layer of Carbon-Kevlar for show, some resin and a polish. I guess this weekend I'm gutting the inside to do some dynamat work and cut the HDPE into speaker rings. Next week its off to the installer for the rest.

Whats coming:

ID 6.5 chameleon comps up front
ID 6.5 coax back and hatch
IDQ8
PPI p900.4
PPIp600.2
PPI p1000.1
AVH 4200-NEX

 

[stphnman20]

Posted this on another thread. Install new rims and tires.

 

[louxwe]

Interesting ......lol..never seen that one...is that a NL weekender fridge in the rear?

Yep, cold beers, fresh burgers, and popsicles for the tailgate.

 

[OatBunch]

New Years Day trip up into Tillamook State Forest [Oregon].
Truck in front of me bent a tie rod on Stick In The Nose. Was super fun in the snow. [video link below]. Got to watch a few [talented] people bend it back with a tree/winch/snatch block combo.

That looks like a blast out there in the snow! I need to get some new rubber with a little more grip than stock, but hopefully I can get that done and get back out to the Tillamook trails before it all melts.

 

[abmpho]

Mocked up my 2.5 bypasses off the front of the LT tundra in the rear of the runner! Should be on and all ready to go by the end of the week

 

[MadeInMaine]

What is the cylinder on there for?

It the is actuator for the bar that raises and lowers the light bar.
It is the Baja Spy Util rack

 

[Dbentley]

Nice! NL has not disappointed ...install looks pretty clean.....please share how the dual battery controller was wired..

Thanks, I'm a little OCD about having everything done a certain way. The dual battery controller plugs into the intelligent solenoid, and I ran it through the fire wall grommet beside the hood release latch cable. After that I ran the controller wire way up high behind the petals (multiple other wire harnesses in that area that you can zip tie to), then came down behind the interior trim in the driver footwell. pushed it through on the driver side of the center console following the AC duct that goes to the back of the center console. Drilled a hole in the center console just in front of the driver side finish panel (this took the longest amount of time due to not wanting to make the hole too large for the grommets I had bought). Pulled the controller wire through the drilled hole and placed the grommet to give it a cleaned up look.

 

[Rogue_Runner77]

That's my favorite truck!

 

[Rogue_Runner77]

Sick build

 

[clweathers]

I got my light bars for my Gobi thats on order. Now i get to stare at these for 16+ weeks. ARB awning should be here today. Awning room has already come in.

 

[Da8ron]

I got my light bars for my Gobi thats on order. Now i get to stare at these for 16+ weeks. ARB awning should be here today. Awning room has already come in.

Stupid question. The four smaller lights, are they for the grill, sides of your rack, or rear?

Sent from my Pixel using Tapatalk

 

[clweathers]

Stupid question. The four smaller lights, are they for the grill, sides of your rack, or rear?

Sent from my Pixel using Tapatalk

I'll be running 1 on each side and 2 on the rear.

 

[Overlanding_USA]

Beautiful. Is that the hefty fab bumper with stock fog lights?

Mind if I ask what winch you have?

Sent from my Pixel using Tapatalk

No, it is Relentless Fabrication bumper, very high quality.

Winch is Smittybuilt 9.5 with synthetic.

 

[brtnstrns]

It the is actuator for the bar that raises and lowers the light bar.
It is the Baja Spy Util rack

Oh wow, that's really cool!

 

[Dorobuta]

Ordered my Prinsu rack and Wet Okoles for the from and back seats....

 

[weeeee]

Had the 4Runner detailed for the first time since I bought her. They even put tire shine on the bumpers and sliders ound:

Looks funny without the coat of dirt and mud that's been on it

 

[the_dude33]

Hit 10k on the way to work this morning.

Sent from my iPhone using Tapatalk

 

[Friggin Idiot]

Took the boat to the upholstery shop for new seats. Lots of odd looks from people driving around with a boat at 28F today and high of 25F and snow tomorrow!

 

[greatape]

Thanks, I'm a little OCD about having everything done a certain way. The dual battery controller plugs into the intelligent solenoid, and I ran it through the fire wall grommet beside the hood release latch cable. After that I ran the controller wire way up high behind the petals (multiple other wire harnesses in that area that you can zip tie to), then came down behind the interior trim in the driver footwell. pushed it through on the driver side of the center console following the AC duct that goes to the back of the center console. Drilled a hole in the center console just in front of the driver side finish panel (this took the longest amount of time due to not wanting to make the hole too large for the grommets I had bought). Pulled the controller wire through the drilled hole and placed the grommet to give it a cleaned up look.

Thanks, that what I was thinking when I saw that grommet in the pic.

 

[DKRunner]

Last week. Shrockworks sliders.