Badmeat
New member
No worries. I did this kit - 3" FJ Lift w/ front & rear coils
They aren't coilovers...coilovers are inherently adjustable. Simply springs and a spacer set for the front.
What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
They aren't coilovers...coilovers are inherently adjustable. Simply springs and a spacer set for the front.
FrenchToasty
New member
Black out of 2017 is over!
Ahhhh, I haven't had a Saturday off in a while......beers and mods at 7am, yes please! So I followed Antman and sp8ball write up on card removal and handle removal, all went well but I pulled one back off cuz I knew I forgot to flip the yellow clip back onto the handle
Thanks to another member for these handles!
Ahhhh, I haven't had a Saturday off in a while......beers and mods at 7am, yes please! So I followed Antman and sp8ball write up on card removal and handle removal, all went well but I pulled one back off cuz I knew I forgot to flip the yellow clip back onto the handle
Thanks to another member for these handles!
Attachments
graciedad04
New member
Well to start the day i removed the deer damage best I am able to until i decide the route i want to take with the front bumper. After lunch I will start on the hail removal process to get that repaired in preparation for a gobi roof rack that is already ordered.
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
Angonemoto
New member
Badged the tailgate.
I was jealous of the Pro folks who apparently get badges on the tailgate so I put some on today in the same configuration as the C pillar lock up on my Off Road today. I spent some time taping them up in the same position as the Pros have, but in the end since the lock up has off road on two lines I made some adjustments to visually align it with the contours of the styling and the right edge of the gate itself.
Now that it's on I think I need to dip them all to black or anthracite. This is a fun distraction while waiting to fund the expensive mods
I was jealous of the Pro folks who apparently get badges on the tailgate so I put some on today in the same configuration as the C pillar lock up on my Off Road today. I spent some time taping them up in the same position as the Pros have, but in the end since the lock up has off road on two lines I made some adjustments to visually align it with the contours of the styling and the right edge of the gate itself.
Now that it's on I think I need to dip them all to black or anthracite. This is a fun distraction while waiting to fund the expensive mods
Attachments
Angonemoto
New member
Is that matte black powdercoat or paint?
Khjphoto
New member
Getting closer to the finished storage/sleep platform. Off to the upholster
On Monday to carpet the top. What you see here is the forward half. The rear section has drawers and the refridge. Will post more when done. Total height is 5.5 inches. Leaves plenty of "head room"
On Monday to carpet the top. What you see here is the forward half. The rear section has drawers and the refridge. Will post more when done. Total height is 5.5 inches. Leaves plenty of "head room"
Attachments
5thGen4Runner2015
New member
Finally received and installed the Ecotechne ladder. After a long delay with minimal updates, we received incorrectly bent bottom brackets. Had to go to a welder to have it cut and flipped and reweld it.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
phillychee
New member
Arrived home from a 9 day 2700 mile road trip. What a blast!
Denver, CO > Omaha, NE > Lander, WY > Jackson, WY > Idaho Falls, ID > Manti La Sal Natl Forest, UT > Capitol Reef NP, UT > Moab, UT > Denver, CO
Moab:
Home:
Denver, CO > Omaha, NE > Lander, WY > Jackson, WY > Idaho Falls, ID > Manti La Sal Natl Forest, UT > Capitol Reef NP, UT > Moab, UT > Denver, CO
Moab:
Home:
NoGaRunner
New member
Finally took some pictures with my C4Fab sliders:
Nice! Look great.
Magnetic4R
New member
Not great pics, but got my Hefty Fabworks sliders installed and am very happy with them so far. Kinda hard to see the difference from the side view. I did have some issues getting some bolts in though.
All the holes in the mounting brackets lined up perfectly, but one of them on the rear passenger side bracket didn't line up to a threaded hole in the frame? Not sure what the deal is there, but will give them a call Monday. To date, their customer service has been excellent, so no problems there. The other one I couldn't get in because I couldn't move the KDSS lines out of the way enough. Will have to try that one again in a couple days.
All the holes in the mounting brackets lined up perfectly, but one of them on the rear passenger side bracket didn't line up to a threaded hole in the frame? Not sure what the deal is there, but will give them a call Monday. To date, their customer service has been excellent, so no problems there. The other one I couldn't get in because I couldn't move the KDSS lines out of the way enough. Will have to try that one again in a couple days.
TerraCrawler
New member
Installed my Overland Equipped ladder steps, they are awesome, you can read about it here in my build thread:
http://www.toyota-4runner.org/2783892-post39.html
http://www.toyota-4runner.org/2783892-post39.html
graciedad04
New member
Yhea that link takes you to a post on lincoln aviator?
Sent from my SM-G955U using Tapatalk
TerraCrawler
New member
I just clicked on it and it takes you to my build thread, post #39......is it not working for you? Here is the link again:
http://www.toyota-4runner.org/2783892-post39.html
Similar threads
