What did you do to/in your 5th Gen today?!

[HighTechAddict]

Got the old one a step closer to back to stock

After spending the day putting up Christmas lights, I put the Limited running boards back on the '99 to get it one step closer to being ready to sell. More lights to hang tomorrow and then will probably throw the stock radio back in it as well.

:Cry:

 

[2nd Chance]

which treatment did you have done ?

Had a Corrosion Free treatment done today! I hope this helps prevents damage on the 4Runner from the salt treatments on the roads in Ohio.

Sent from my iPhone using Tapatalk

Sent from my iPad using Tapatalk

 

[HeartGuy]

Little more lumens!

Sent from my iPhone using Tapatalk

 

[RedST4R]

Followed what [MENTION=56922]NoOneBetter[/MENTION] did on location of installing this Noco AC port plug. I used it to plug my winterization kit (block heater, trans and oil pad heat pads). Beats the cord hanging out in front.

Sent from my iPhone using Tapatalk

 

[4RN4FUN]

which treatment did you have done ?










Sent from my iPad using Tapatalk

Corrosion Free - https://corrosionfree.com/?_vsrefdo...Gks95g4qAPua0_JtIEGq8qXZfNaYLrJRoCxKAQAvD_BwE

 

[Northern 4Runner]

Corrosion Free - https://corrosionfree.com/?_vsrefdo...Gks95g4qAPua0_JtIEGq8qXZfNaYLrJRoCxKAQAvD_BwE

Looks good. I use rust check, but same idea. Better than doing nothing and them complaining about all the rust 5 years or so down the road

 

[Soneill]

I changed my valve cover gaskets and spark plug tube seals(plenum gasket too). When i changed my spark plugs the other day I had 3 spark plug tubes with oil in them. Took about 3 hours all together with me taking my time.








Also had to add some Christmas Cheer!!!

 

[97BlackAckCL]

Just a small update, but I finished my LED swap of all the incandescent bulbs. I swapped the puddle lights in the mirrors out, and now you can actually see them at night lol. Taking the mirrors apart was nerve racking and stressful but not overly complicated, still a lot of work just to change out a damn lightbulb though!

 

[Friedom]

Rolled over 34 miles.

 

[Joe-Runner]

Followed what [MENTION=56922]NoOneBetter[/MENTION] did on location of installing this Noco AC port plug. I used it to plug my winterization kit (block heater, trans and oil pad heat pads). Beats the cord hanging out in front.

Sent from my iPhone using Tapatalk

I copied the Canadian model and put it right on the face. I hate having that plug just hanging.

Sent from my SM-G892A using Tapatalk

 

[mqphung]

I just ended buying some Xenondepot HID’s and some detailing supplies online. Got to keep my baby clean.

 

[gdvan01]

Just a small update, but I finished my LED swap of all the incandescent bulbs. I swapped the puddle lights in the mirrors out, and now you can actually see them at night lol. Taking the mirrors apart was nerve racking and stressful but not overly complicated, still a lot of work just to change out a damn lightbulb though!

Did you pry the mirror off the front or pull off the top part on the back?

 

[97BlackAckCL]

Did you pry the mirror off the front or pull off the top part on the back?

I pryed the mirror off to get to the clip to release the back part, then you can get to the screws. It's a bit of a pain, but once you do the first one you see how it all goes together

This video was really helpful

https://www.youtube.com/watch?v=6O30-rctTDA

 

[scubajosh77]

Brought it home!

Sent from my iPhone using Tapatalk

 

[gdvan01]

I pryed the mirror off to get to the clip to release the back part, then you can get to the screws. It's a bit of a pain, but once you do the first one you see how it all goes together

This video was really helpful

https://www.youtube.com/watch?v=6O30-rctTDA

Yeppers, have watched that one a few times!

Got the interior and reverse lights squared away a little earlier, puddle lights tomorrow. Had seen another post where they stated they had pulled up and out ( I believe ) on the back top part. Just curious if anyone else had gone that route.

 

[TexasTJ]

Washed and hand waxed. Then buffed out the pin stripes from Colorado and the roof in prep for the Gobi install.

Sent from my SM-N950U using Tapatalk

 

[Seattle206]

Avoided the black Friday crowd and found solace in the mountains... Only to get stuck.

 

[<<<<]

Used this:

Sent from my iPhone using Tapatalk

 

[<<<<]

To go from that:

Sent from my iPhone using Tapatalk

 

[<<<<]

To this plus added power outlets as part of this 2017 trim:

Sent from my iPhone using Tapatalk