What did you do to/in your 5th Gen today?!

[Matteblack]

Christmas eve. Cruising around in snow when came across this accident. The two passengers were literally climbing out as I pulled up to the scene. No injuries. The hill is steeper than the picture depicts but it does not take much to cause problems around here. Hope everyone stays safe this holiday season!
MB

 

[jstnmac787]

following

 

[scubajosh77]

Got my new decals on today

 

[1jzgte]

Changed rear and front diff oil (cheap one), drove for few mins, drained it again. After draining it second time the oil in rear diff looked same color (as I put in) but was very muddy. The front diff second drain looked clear but darker. Filled both diffs with mobile1.

This is how old oil looked like (assuming it was never changed)

how many miles and what type of driving?

 

[toppyjai]

I removed the Bajarack logo, resprayed it black and mounted it back on with some decals to add more horsepower Sorry for the monster sized pic.

 

[AGL-TRD]

New 4Runner + new parts on order

Purchased our 2018 TRD-ORP last week, ordered trd pro grill replacement, and black out package for emblems. Installed emblems today and should get the TRD PRO grill early next week.

Also just placed an order for Icon Stage 2 with tubular UCAs, Fuel vector wheels (18x9"), K&N cold air intake, and Nfab 3" nerf bars. Should be getting all that within the next week. I'll have my hands full of fun projects over the next few weeks! :thumb3:

Couldn't pass up the end of year 10%-15% off on all the parts...

 

[Kenstaroni]

Purchased our 2018 TRD-ORP last week, ordered trd pro grill replacement, and black out package for emblems. Installed emblems today and should get the TRD PRO grill early next week.

Also just placed an order for Icon Stage 2 with tubular UCAs, Fuel vector wheels (18x9"), K&N cold air intake, and Nfab 3" nerf bars. Should be getting all that within the next week. I'll have my hands full of fun projects over the next few weeks! :thumb3:

Couldn't pass up the end of year 10%-15% off on all the parts...

Wish they would have come black. I took mine off. I didn't realize they made a blackout kit for the TRD off-road emblems, I thought just the rear and front grill. Maybe post part #'s if you don't mind.

I also just picked up an 18' T4R TRD Off-road Premium a couple weeks ago. Ordered the same Icon Setup, sounds like we will both be busy this week..lol

 

[TheJokingExplorer]

Move

Packed up my 17 SR5-P and began driving from Indianapolis to Colorado.

 

[TheRuggedGent]

Not today, but over the weekend (because Tapatalk stopped working for me, for some reason):

• Relocated smog pump to passenger-side firewall (Shrockworks kit)
• (FINALLY) installed ARB twin compressor (CKTMA12) on Bandi mount (highly recommend this mount) with AOB switch

Install took a lot longer than expected, mostly because I am so weak on electrical knowledge and was also extra careful with everything. Still have to finish the wiring and tidy everything up this upcoming weekend, but got the bulk of the work done!

Huge thanks to all of the members who've written such great resources on here!

 

[doro89]

how many miles and what type of driving?

I bought it about 3 months ago with 122k miles. It was a family car (stock Limited) and all the regular maintenance was done periodically, but I don't think diff fluids were changed, I might be wrong. Does not look like it ever towed either. Since I bought it I went off-roading twice before changing the fluids.

 

[K9 HAULR]

Took my pups for a hike around the Spooner Summit area...

 

[SteadfastZach]

Tint brow and amber side marker overlays

 

[TexasTJ]

Christmas camping in the Ozark National Forest. Check out my thread for more pictures.

 

[mimcementpro83]

Replaced my 285/70/17 KO2's with 295/70/17 Ridge Grapplers KO2's are now for sale

Nice stance! Stock UCA's? Can I fit 295s on stock 7 inch trd pro rims? I thought I saw someone who did it on the forum or fb.

 

[2016 4Runner SR5]

Nice stance! Stock UCA's? Can I fit 295s on stock 7 inch trd pro rims? I thought I saw someone who did it on the forum or fb.

Thanks and yes back to stock UCA because I HATED the uniball ICON arms. I'll likely be going with new arms soon from someone else but going with ball joint arms this time. The stock 7" wide wheel might be a little on the narrow side and you'll need wheel spacers with stock back spacing. My wheels are 17x8 with a 4.5" BS and 0 offset and I have maybe 3/4"-1" clearance between the tire sidewall and UCA at the ball joint bulge in the arm. No way these tires would clear on a stock BS wheel, at least not from the looks of it. Could always buy the spacers, mount the tires on the wheels, test fit, and only use the spacers if you need them. With that said, this is NOT my recommendation to run spacers. I am personally not a fan of spacers and do whatever it takes to avoid them. Lots of people run them, some have failures, some don't, I choose not to run them.

 

[barryhiram]

Not today but Tuesday, Santa was unable to fit in sleigh...................

2018 Can Am Maverick x3 Xds Turbo R, Triple Black, 900cc triple 172 hp, IT'S A BEAST! :biggrin2:




Parts on order:
Lower Doors
Windshield w/wiper
Roof
Warn 4,500-s winch
Side mirrors
CT Race Worx : Front winch bumper, Sliders, Front A-arm gusset kit, Upper shock gusset kit, and having shocks re-valved/springed.

To be ordered:
Driver/passenger 4-point harnesses
Rear bumper
50" LED light bar - Opt7 curved ordered [MENTION=91899]Jhalko[/MENTION], not a 40" lol
Enclosed aluminum trailer





.

 

[T4 Leaf]

Santa delivered the 3/4 Prinsu about 3 weeks after order ....

Sent from my iPhone using Tapatalk

 

[Fjcoop]

Wrapped up my on board inverter project with a few other goodies

Perfectionist, well done

 

[WarEagle28]

Gave it a much needed detail after a few weeks of rain and snow.

Heading up to the mountains this weekend for New Years and there’s a slight chance of snow, hoping to see some!

 

[blakjack23]

I removed the Bajarack logo, resprayed it black and mounted it back on with some decals to add more horsepower Sorry for the monster sized pic.

Is it upside down? It seems like the rounded corners should be on the bottom where the rack is narrower. ?