It's fixed now :thumb:
What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
It's fixed now :thumb:
Thanks!
BTW if you haven't been, I'd highly recommend Wichita Mountains Wildlife Refuge (32 Refuge Headquarters Road, Indiahoma, OK 73552). It's the best hiking area we've found near Dallas so far:
took my 2 week newborn out for a 3am drive to show her how sweet my 4runner is, over the wifes RDX... she was so excited, that she passed out immediatelyMission accomplished... had some sweet silence for 45 minutes driving the empty streets.
I used to do this to my son in my 1988 TLC FJ62, leaf springs and a touch or Carbon Monoxide worked every time.
Hey guys looking for some help. I own a 2015 trd pro 4 runner and my front grille got hit by someone backing up. The grille and truck was fine but it knocked off the O in Toyota on the grille. I’ve been trying to find a replacement part but unable to. Even went to dealership and they giving me run around. Any ideas ?
there was a guy who lost his T, maybe you can get with him and split the kit?
RustyAb
New member
Haha it’s incredible what they can sleep through! I am now debating taking her (and mom) on a 2-3 hour rip through some oilfield lease roads in the foothills later today.. getting antsy with all the snow around here. And wanna see how the 6112’s feel on light off-roading.
Lollerskates
New member
Got some lift today!
Bilstein 6112/5100 with King 14" 650 lb spring in the front and Wheeler T13 spring in the back. Bilsteins are set to 5/3 offset for non-KDSS. OME rear trim packer installed as well on driver side. Driver side rear is still sitting slightly lower.
Heavier springs for the front for lo pro bumper and winch, bumper should be on its way very, very soon. Front is pretty damn stiff as expected, but overall the drive isn't too bad for daily driving. Hoping to get just a little more rake when the bumper/winch get put on, will have to see if the front Bilstein settings will require adjustment after everything is settled in.
Before and after install before any settling (all numbers provided by shop):
Fr DR FR Pax
Rr DR Rr Pax
34 5/8 34 3/4
36 3/8 37 1/8
37 1/4 37 1/4
38 1/8 38 5/8
She still needs new shoes, running stock 265s from the dealership.
Bilstein 6112/5100 with King 14" 650 lb spring in the front and Wheeler T13 spring in the back. Bilsteins are set to 5/3 offset for non-KDSS. OME rear trim packer installed as well on driver side. Driver side rear is still sitting slightly lower.
Heavier springs for the front for lo pro bumper and winch, bumper should be on its way very, very soon. Front is pretty damn stiff as expected, but overall the drive isn't too bad for daily driving. Hoping to get just a little more rake when the bumper/winch get put on, will have to see if the front Bilstein settings will require adjustment after everything is settled in.
Before and after install before any settling (all numbers provided by shop):
Fr DR FR Pax
Rr DR Rr Pax
34 5/8 34 3/4
36 3/8 37 1/8
37 1/4 37 1/4
38 1/8 38 5/8
She still needs new shoes, running stock 265s from the dealership.
Engineer
New member
mrblah
Senior Member
Got some lift today!
Bilstein 6112/5100 with King 14" 650 lb spring in the front and Wheeler T13 spring in the back. Bilsteins are set to 5/3 offset for non-KDSS. OME rear trim packer installed as well on driver side. Driver side rear is still sitting slightly lower.
Heavier springs for the front for lo pro bumper and winch, bumper should be on its way very, very soon. Front is pretty damn stiff as expected, but overall the drive isn't too bad for daily driving. Hoping to get just a little more rake when the bumper/winch get put on, will have to see if the front Bilstein settings will require adjustment after everything is settled in.
Before and after install before any settling (all numbers provided by shop):
Fr DR FR Pax
Rr DR Rr Pax
34 5/8 34 3/4
36 3/8 37 1/8
37 1/4 37 1/4
38 1/8 38 5/8
She still needs new shoes, running stock 265s from the dealership.
Looking good and a little rake is good so when you load the back up with passengers, you won’t have a sagging butt
bluepear2000
New member
2” Rough Country leveling kit, 17” Fuel Vapor wheels with 265/70R17 Nitto Ridge Grapplers.
Sent from my iPhone using Tapatalk
TRD PANTHER
New member
2016 4Runner SR5
Senior Member
What is the BS and offset of these wheels? I like the stance.
[email protected]
Member
Installed Toytec superflex 2.0 coils in the rear. Picked them up from another member a couple weeks ago... finally got the time to install them. I dont know if I like them. Time will tell.
2016 4Runner SR5
Senior Member
For being "super flex" they're pretty firm. Your shocks also play a part in that though.
[email protected]
Member
Coming from stock springs with spacer... these feel very sloppy. Im going to give them a little while and see. Do some offroading in the mountains and the beach, see how they perform.
Attachments
Similar threads
