What did you do to/in your 5th Gen today?!

Recent mods

Recently finished my 3" lift with toytec springs, bilstien shocks and JBA uca's. Ordered Durobumps today and looking forward to installing them.
 
Did the typical plastidip stocks wheels and emblems, but it looks so good.
9624bc28f7307198426e89322a58f1a3.jpg
a2a925fc24acc7955a123da21666a309.jpg



Sent from my iPhone using Tapatalk
 
Replaced my stock exhaust with a Borla Touring cat-back
Before:

img_20190429_165914_f179336910d57e5c27f1f8d2a643bc87d0ab90a3.jpg


For a year and a half old vehicle the rust was pretty crazy, we had a hell of a time getting to the upper bolts on the exit pipe, even bending the exhaust down we couldn't get to them.

img_20190429_171552_483dcd0a3be1cfb695ad6e53d6737ffbe078cc65.jpg


We ended up cutting the stock pipe, I didn't want to but finally I suggested it and we got this sucker right out

img_20190429_202639_00d5e72b509d40a773b9a53b36a628c0c60f7954.jpg


Installing the new muffler was a piece of cake after that, everything mounted right up as it should. I replaced the stock cat-back with a Borla Touring cat-back system.

img_20190429_181051_77767a27ccbdb446e0f5534c55b6259ad6d0bcb1.jpg


img_20190429_181104_1e5d74faab59963c7bbbeb6fbed73376d65cff17.jpg


We had to drop the spare in order to get the old piping out and route the new piping and remove a heat shield, but it was a simple task and made tons of difference

img_20190429_174126_0d6b9d32a0118a67160256cc0a77c27904ea55f9.jpg


Here's the piping all routed and mounted up

img_20190429_181058_728cde1b46aac656dcd968146ef6e48f44d29223.jpg


And the Borla tip right in the stock location. It lined up perfectly and no modification to the stock mounts was needed.

img_20190429_180518_ce7c38cd01220f21a8b85eedbab0064b89eed451.jpg
 
Not being much of an analog guy at least one it comes to electricity... added one of these knockout digital voltage meters ;): switched relay and direct connect to the terminal for a pretty damn accurate read, like :thumb:

can you share where you got this from? the one I got on amazon say it should work for a 2015 but its too tall to fit in the space :(
 
lift and new wheels/tires

Bilstein 6112/5160.
Falken wildpeak 285/70/17
Black Rhino Attica

love the new ride.

4r.jpg
 

Attachments

  • 4r.jpg
    4r.jpg
    135.9 KB · Views: 1,593
cleaned the pollen off the 4runner with my Adams Polishes foam cannon
 

Attachments

  • IMG_20190427_115117.jpg
    IMG_20190427_115117.jpg
    141 KB · Views: 666
Hit the trails with my boy Rustin!

Hit the trails with my boy Rustin at Reading Famous Outdoors in Pennsylvania (his pictures, not mine).

Reading_5.jpg

IMG_2469.jpg

Reading_2.jpg
 

Attachments

  • Reading_5.jpg
    Reading_5.jpg
    140.8 KB · Views: 1,735
  • IMG_2469.jpg
    IMG_2469.jpg
    124.7 KB · Views: 1,751
  • Reading_2.jpg
    Reading_2.jpg
    145.6 KB · Views: 1,739
Last edited:
Had Wildpeak ATs swapped for Cooper STT pros. Nothing wrong with the falkens, Discount offered to do a straight swap since they couldn't get the wildpeaks balanced correctly. The Cooper's are not balanced great either but I couldn't pass that deal.

GYYQfEBh.jpg
 
Had Wildpeak ATs swapped for Cooper STT pros. Nothing wrong with the falkens, Discount offered to do a straight swap since they couldn't get the wildpeaks balanced correctly. The Cooper's are not balanced great either but I couldn't pass that deal.

GYYQfEBh.jpg

I wish they offered me the same. 3/4 of my Wildpeaks were very difficult to get balanced and the other was completely out of round from the factory. They only offered to replace the out of round tire, but it took them 3 tries for that one tire. Never again will I buy these tires and never again buy from Discount lol

Edit: your truck looks great !
 

Members online

No members online now.

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Trending content

Back
Top