What did you do to/in your 5th Gen today?!

Attachments

  • smoke 1.jpg
    smoke 1.jpg
    61.2 KB · Views: 699
  • smoke 2.jpg
    smoke 2.jpg
    64.4 KB · Views: 681
This past weekend I detailed the inside and outside of my "new to me" 2014 4runner Trail. We also put my new TAC nerf bars on, so now I can get in without looking like an idiot (I'm 5'2" and have pretty big tires)! I love my 4runner!!

Sent from my SM-G930P using Tapatalk
 
Scored a Gobi Ranger rack on craigslist for $800 (!?) a few weeks ago and finally installed it last night. Still need to put the wind deflector on but ran out of daylight. The previous owner threw in the light bar, no branding on it so I imagine its some ebay/amazon generic. I'm not sure if it works but it should do until I figure out what I want to replace it with.

1PiGNe9.jpg


NPRpjs3.jpg
 
Added a few mods

Haven't been on here in awhile... Few mods I've added included ROLA rack with low profile mounts I fabbed up myself. RGB ditch lighting mounted to Cali-raised low profile ditch mounts with OEM switch, xenon depot 2700 amber fogs with lamin-x yellow lense cover, & Tyger auto nerf bars. Loving the look! Even painted the tiger red on the nerf bars to match the black and red theme i've got going on :thumb:
 

Attachments

  • Snapchat-488611335.jpg
    Snapchat-488611335.jpg
    134.9 KB · Views: 634
  • Snapchat-131183744.jpg
    Snapchat-131183744.jpg
    137.9 KB · Views: 659
  • PicsArt_06-06-11.14.53.jpg
    PicsArt_06-06-11.14.53.jpg
    134.1 KB · Views: 683
Last edited:
Installed switchable Red/White interior LEDs and a dash top light sensor to restore that functionality to the 4Runner

s-l1600.jpg
 

Attachments

  • image1-4-1.jpg
    image1-4-1.jpg
    46.4 KB · Views: 926
  • IMG_6873-2.jpg
    IMG_6873-2.jpg
    48.1 KB · Views: 931
  • image2-3-1.jpeg
    image2-3-1.jpeg
    96.2 KB · Views: 959
Should all of our 5th gens have this wire? I pulled my plug I had in there, and there was no wire connected to it. perhaps it had fell down at some point? It looks like I would have to pull the radio or something similar to get that far back. Assuming there is no wire, is this a cheap harness that can be bought and simply plugged in?

Hmmm. You have a 14 TEP?
I have an 18 ORP and mine had the harness. I would think your trim would have it too. Maybe you can hover your phone camera over the hole in the dash to get a picture of what’s in there. Or look through the windshield. Or fish around with a thin wire to grab it. But probably the best bet is to remove the radio to see what’s there.
 
Where can I find these? Can you post a link please? Looks Great!

Whether you like Amazon or Ebay, search for Toyota part number 89121-30010

First check to see if your dash has the harness installed. This sensor allows you to turn your headlights on in the daytime yet have the dash lighting continue at normal brightness
 
That shroud is a pain! I put xenon Depot extreme LED’s in the fogs and love them! I also put the lamin x yellow film over the lens. What did you put in the tail lights. I’m about to buy some GTR Lighting Armor series to go with the diode dynamics turn to tail + reverse kit.


Sent from my iPhone using Tapatalk

Got these for the reverse, https://www.amazon.com/JDM-ASTAR-Extremely-Bright-Reverse/dp/B01CRGU91Y I honestly have not had a chance to use them in the dark to see what kind of output, but they had decent reviews.
 
fdc4a7275f98305825dbfe8d7b949380.jpg
806b728abd95afeeb925e25a14b4a84c.jpg
83f542bbcdd4e79556d6b7e7475b5a82.jpg
0dc1f6caeea464ff0889becdca23ee0f.jpg
took a lot of great ideas from this forum and crafted my own sleeping platform. It’s got a slide out table and storage underneath. It fits level with the rear seats as well.


Sent from my iPhone using Tapatalk
 
I put the small dash cubbyhole to better use. I installed a four-switch bank to control some additional interior lighting. (Switch housing from S-Tech and switches from Digi-Key). With one switch I implemented the [MENTION=65614]Antman[/MENTION] inspired constant/accessory 12 V to the dash power outlet. Also one switch controls an LED to light the cupholder/shift knob area. The other two switches are spares for future use.

I don’t like the leaving the fuse box uncovered and fuses exposed when using fuse-taps so I found this extended fuse box cover from ME-SO Customs.
Extended Fuse Cover - 4Runner
– MESO CUSTOMS LLC

It works well to accommodate the additional height of the fuse-taps.
 

Attachments

  • 5392B367-A28F-4116-95AE-991AAE56BC1C.jpeg
    5392B367-A28F-4116-95AE-991AAE56BC1C.jpeg
    80.7 KB · Views: 811
  • 0A8B84A6-47B9-4C6F-81F8-E05F277FD220.jpeg
    0A8B84A6-47B9-4C6F-81F8-E05F277FD220.jpeg
    40.3 KB · Views: 813
  • 1924EE7F-A14A-4870-B8ED-377EC4A41F21.jpeg
    1924EE7F-A14A-4870-B8ED-377EC4A41F21.jpeg
    78.5 KB · Views: 866
  • B5FC59A6-A724-449E-890C-85ABBBCB6D61.jpeg
    B5FC59A6-A724-449E-890C-85ABBBCB6D61.jpeg
    83.5 KB · Views: 805
  • D0D4FF45-D056-49FA-BF78-58AC388D2D4E.jpeg
    D0D4FF45-D056-49FA-BF78-58AC388D2D4E.jpeg
    81.3 KB · Views: 806

Members online

Forum statistics

Threads
278,316
Messages
3,554,124
Members
248,016
Latest member
Advally Service

Trending content

Back
Top