What did you do to/in your 5th Gen today?!

So I was trying to see if I could replace the weird chrome grill inserts Toyota decided to put in non pro 2020’s. I saw somewhere that black ones existed so I was trying to find the part # but found this on Toyota parts direct..... why would they be discontinued? Shows that way for all models with that grill type including nightshade
 

Attachments

  • 2E7CE216-52CC-4A84-98F8-00A5FB58AAAA.jpg
    2E7CE216-52CC-4A84-98F8-00A5FB58AAAA.jpg
    49.8 KB · Views: 549
Last edited:
Nice cut. Sawsall or cutting wheel/grinder?
How scary on a 1-10 scale?

Thanks!

Initially I tried the Sawzall but my blade was not long enough and the tool was just too bulky.

I used my air cut off wheel for most of it, but still couldn't fit the tool to get to the very top of the body mount.

Then I remembered I had a big electric Makita Paddle Switch Grinder. This thing was a beast and I probably could have done the whole thing with this tool. I love this thing.

I did not take off my wheels; I just popped off the small fender/rocker trim piece that took about 5 seconds and turned my wheels full lock out of the way.

I cut in pie shapes so I could make a clean straight cut at the top of the body mount, otherwise the wheel wont fit to the top.

I'm pretty handy and comfortable with grinders, so it was not scary at all. I used a Sharpie to give me some rough guidelines and was careful not to damage the body mount or cut into the floor.

It'll look so much better once I smooth up the cuts a little more and weld on my custom plates. It'll look like it came that way.

ZwUuHw8.jpg


UyS3KCI.jpg


pte0t7k.jpg


kCK7U49.jpg
 
Last edited:
Had to get out of the house today. Took a slow drive south about 40 miles, then came home. Took 1.5 hours, and got a whopping 24.6 miles per gallon!

daw89446-albums-4running-picture57751-6a1cb6c1-d4c7-4a7d-a83d-acf91f7a85c7.jpeg


daw89446-albums-4running-picture57752-5df2f3e5-03e2-44b8-abd0-4492eaf5f3d0.jpeg
 
What LED's did you go with??


Used these, and they fit in there perfectly.

AUXITO 194 LED Light Bulb 6000K... Amazon.com: AUXITO 194 LED Light Bulb 6000K White 168 2825 W5W T10 Wedge 24-SMD 3014 Chipsets LED Replacement Bulbs Error Free for Car Dome Map Door Courtesy License Plate Lights, Pack of 10: Automotive


Today I added XD 9005 LED’s with the drivers for my DRL / Hi Beams, what a difference!! Nice and bright white and no flicker at all despite hearing what some have said.

Also added Cougar Motors LED’s for the Low Beams and they look great and give me plenty of visibility at night (my personal preference).

Since they worked so well I ordered another set for the fogs.

The picture is hard to tell, but shows the original DRL on the left and new XD DRL LED on the right.
4d926a9e736a0edd42748a1fdd902500.jpg




———
2015 4Runner Limited 4WD Mag Grey w/ Redwood Interior
 
Installed Bilstein 5100s front and rear with Dobinsons 302/505 (2.5/1.5") springs.

The Bilstein 5100s apparently corrode pretty easily (see someone elses pic here: https://www.toyota-4runner.org/atta...00-after-6-months-img_20130710_193333_725-jpg

so I sprayed them with a few coats of clear a few days ago.

49802175281_daf7ba6242_h.jpg


49801616208_6ee45681b4_h.jpg


49802474547_2836fdc8b9_h.jpg


49802166546_8a088e8ffd_h.jpg


49802166526_ca3377d9cb_h.jpg


49801616008_45c0fda376_h.jpg


49802474342_cfb8e6f7db_h.jpg


49802166586_5c658dfdd5_h.jpg


Now, after getting an alignment, I need to have my TPMS swapped over to my Bronze 17x8.5 SCS F5s and have the 285/70s mounted up. The lift made these OEM sized Falken Wildpeaks look tiny. I will be selling the TRD Pro wheels with 265/70r17s mounted up here soon. 12k miles on them, both purchased brand new.

49802474357_8d3c6b98be_h.jpg


49802474332_d5ad37055c_h.jpg
 
Last edited:
So I was trying to see if I could replace the weird chrome grill inserts Toyota decided to put in non pro 2020’s. I saw somewhere that black ones existed so I was trying to find the part # but found this on Toyota parts direct..... why would they be discontinued? Shows that way for all models with that grill type including nightshade

Is there any reason why you can't just swap the upper grill with an older version that has no chrome strips at all?

I'm pretty sure the only reason they added those was to distract the eye from that huge TSS radar block in the lower grill.
 
Looks great! I've been waiting 4 months for those to be restocked so I can order...US website says late April/early May, so hopefully soon!

I got the last set available here in Calgary and got the same answer on availability so I just jumped on them.

The 0 offset vs the +15 of the OEM on give a nice stance to the 4R but on ours ( with no lift) and the 255/80 tires it rubbed a little... easy fixed.
 
Is there any reason why you can't just swap the upper grill with an older version that has no chrome strips at all?

I'm pretty sure the only reason they added those was to distract the eye from that huge TSS radar block in the lower grill.

It's driving me crazy that I can't find it again but I did see someone asking if a 2020 non-pro grill would fit their TE model. Could be worth searching and maybe swapping. There's also a 2018 grille assembly FS in the classifieds right now.

Grille Assembly - Toyota (53101-35080-J0)
 
Welp this is how my day went got hit by a dump truck that ran a red light

now the waiting game with insurance
 

Attachments

  • EC1A5001-066A-4C6C-8141-70FE9AEE2CE5.jpg
    EC1A5001-066A-4C6C-8141-70FE9AEE2CE5.jpg
    136.4 KB · Views: 730
  • ADDFBAB3-4674-489A-ACD6-60DCF73BB940.jpg
    ADDFBAB3-4674-489A-ACD6-60DCF73BB940.jpg
    136.8 KB · Views: 725

Members online

No members online now.

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Trending content

Back
Top