That’s great!
A real "pain in the ass" but so worth it...
That’s great!
Awesome. We’re planning on going in April. Towing a 19’ TT as well. Where did you end up boondockin?
Great set up. I’m get ready to do the same Bilstein set up as you - if I can find any in stock. Do you run airbags ?
Sent from my iPhone using Tapatalk
Tried to figure out why my rear hatch/window/wiper/defogger will not work, fuses are good, bought a new rear ecu, checked connections. Still nothing. Guess there is a short somewhere? Driving me nuts! First electrical problem I’ve ever dealt with automotive wise so I have some learning to do.
Sent from my iPhone using Tapatalk
Roll your window up. The rear window being down any amount turns all of those functions off. It's probably down like a 1/4"Tried to figure out why my rear hatch/window/wiper/defogger will not work, fuses are good, bought a new rear ecu, checked connections. Still nothing. Guess there is a short somewhere? Driving me nuts! First electrical problem I’ve ever dealt with automotive wise so I have some learning to do.
Tried to figure out why my rear hatch/window/wiper/defogger will not work, fuses are good, bought a new rear ecu, checked connections. Still nothing. Guess there is a short somewhere? Driving me nuts! First electrical problem I’ve ever dealt with automotive wise so I have some learning to do.
Sent from my iPhone using Tapatalk
Added Pelican's 1650 Molle panel to the rear lift gate. Turned out pretty good. its made out of Pelican's Plastic so its light weight, i believe around 8-9#. They have a QD system so i can take off the panel to add/remove pouches easily. lift gate stays open with baja ladder and molle pouches attached.
What did you use to attach it to the door?
So, funny story, I didn't end up towing this out there. I rented it through outdoorsy; the owner offered deliver it and set it up for a few extra dollars and I took him up on the offer!
However, I do have some bags ready, for when I get a trailer of my own to tow. And I'm still waiting on my rear shocks, they've been in back order for weeks now.
This is the spot I was camped at. 37°02'16.4"N 113°18'16.7"W
Google Maps
There are TONS of spots all around this area. Beware though, the roads are rough getting to some of the spots. Walk the road first to make sure your trailer will survive! And enjoy - This was one of my best camping trips!
Installed an attic in the runner....
Attempted Toquerville Falls today. Didn’t make it. At one point I had one tire airborne. Got a big gouge in my RCI aluminum skid. The group buy was well worth it. Damage could have been worse. I’ll take another shot in the future with my RCI rock sliders when RCI delivers it. Maybe by then I’ll have larger tires and a lift. I’ll also start in the morning and not late in the afternoon.
Considering how trailers have special quirks and oddities it's nice to have someone set it up when renting. I'm looking into purchasing an A-liner or other pop-up in the near future. What do you tow?That’s hilarious. Not judging at all. Actually it’s probably smart. Trailers are like boats. Lots of headaches for the few times you ISE them.
Thanks for the pin! I’ll check it out.
We just renovated ours. So we’re all in.
Sent from my iPhone using Tapatalk
Got my Baja Designs ditch lights wired (installed on Rago low profile mounts) and got the Anytime Backup Camera all wired up (with front camera and GPS override). Was planning to do the wiring myself, but having previously cracked my vertebrae in 5 places, I just wasn’t up to getting under the dash. Last time I did it for 5 minutes to wire in a TBC I couldn’t walk for a week. Trusted the job to Finish Line Auto Salon in Maple Shade, NJ. If you’re in South Jersey or Philly, check these guys out. They do really nice work and are super easy to work with. Also shout out to Brian at Anytime Backup Camera for the on the spot tech help.![]()
![]()
Sent from my iPad using Tapatalk
Where did you get stuck ???
There's was a spot where I got stuck but that was went I took the wrong line.
Did you come up; spring drive