What did you do to/in your 5th Gen today?!

[Jakeepoo3]

No but very close and have many people already asking where I got it. just haven't finished the area under the headlight area. And haven't decided on a winch yet. I like the unpainted look and just wire wheel it once in awhile. Here's the competition I liked his design but made some changes to my preference. I might do 1500..

 

[Jakeepoo3]

Next on the list. Back bumper, rock sliders, skids

 

[Jakeepoo3]

By the way it weighs nearly the same as the stock plastic rock catcher.

 

[Robwilco]

Today I finally took out the plastic cover for my shifter. I managed to get some sticky substance in there and every time I shifted from park to anything, it would stick and bend the plastic. Bothered the everliving heck out of me for about 5 months... Finally had enough and got rid of it. My anger is no more!! Will probably pay the $20 to get a replacement piece eventually, but I am good for now. No more drinking anything but water in the car now.

its the little things

 

[DriftingOverland]

Ran power to the rear of my rig to hook up my BlueSea distribution ports.

And installed this beast. (And THANKS Bandi! Perfect mount.)

(Well… actually not today, but yesterday.)

Sent from my iPhone using Tapatalk

 

[TheWraith]

Finished fabrication design on my custom made front bumper. Took me a few different designs until I found the beast look for under the headlight area. Weld it up tomorrow. $2000 if you want one.

Looks like 4x4labs one...

 

[frankiepancakes]

Added Prinsu 7/8 roof rack.

Nice! I have the same color/spec 4runner and was curious how this looks / works / sounds with the moon roof?

 

[honda250xtitan]

Wired 2 baja designs S2's for dust lights on the prinsu rack, wired up the OEM style DR KDSS sway bar off switch, and ordered some zip tie holders for the crossbars intsead of having zip ties go around the cross bar. Tnutz is the best.

 

[Jakeepoo3]

Looks like 4x4labs one...

Very close! Good eye! Difference is I made it from an old cardboard box and quite a bit of geometry and an angle grinder. I changed it quite a bit if you look. I'll take that as a compliment! That's sick on my girl! Lots more to come

 

[DriftingOverland]

Wired 2 baja designs S2's for dust lights on the prinsu rack, wired up the OEM style DR KDSS sway bar off switch, and ordered some zip tie holders for the crossbars intsead of having zip ties go around the cross bar. Tnutz is the best.

Did something a bit cheaper on the dust lights since I spent all my change on an SSO rack, but yes… TNUTZ is awesomeness! Used them for the rear bar here and building a set of drawers.

Sent from my iPhone using Tapatalk

 

[T4Jumper]

Trimmed my front bumper a little. I tried to do a more subtle bumper cut and retain the front fender liner. I also avoided cutting off any mounting points for the bumper and fender liner. I’m really happy at the end result. These pics are before I sanded it down.

Sent from my iPhone using Tapatalk

 

[honda250xtitan]

Did something a bit cheaper on the dust lights since I spent all my change on an SSO rack, but yes… TNUTZ is awesomeness! Used them for the rear bar here and building a set of drawers.

Sent from my iPhone using Tapatalk

hey my S2's were free! they sent me an extra set instead of rock lightsarty: lol

 

[DoctorJoe]

Fall is here

Had to clean my new 2021 TOR with the leaf blower.

 

[Blue 4ever Runner]

Finally got there.

Trip from NY to NC finally hit 10,000 miles. Got it in Feb 2019.

 

[Sisente]

New Shoes

Put new shoes on today. Falken Wildpeak AT3W Stayed with the stock size for now.

 

[rhadam]

Replaced my stock LCA's with DirtKing LCA's. Of course the cam bolts were seized and I forgot to order a new OEM set. Finishing up tomorrow when the new set comes in.. I will grab some pics when it's on the lift. As far as build quality and fit.. these DirtKings appear really good for the price.

 

[rhadam]

After a 2.5 hour delay because the dealer parts dept "forgot" half of the cam bolt hardware.. LCAs are installed and greased. Please excuse the surface rust.

 

[T-Runner]

Lovin’ it already.

If you dont mind me asking, what is the specs/item numbers on the setup ? Hows the ride on freeways and getting around town ? I was debating on those twin tubes vs the IMS being that theres $500 difference. I wont be doing too much off roading so im not worried, if any it'll be slow speed on sand and soil.

I was looking to the 302 spring with the 574 extended shock in the front for a 3.5" lift and a 325 spring in the back for 2" lift.

 

[bigdaddy2021]

If you dont mind me asking, what is the specs/item numbers on the setup ? Hows the ride on freeways and getting around town ? I was debating on those twin tubes vs the IMS being that theres $500 difference. I wont be doing too much off roading so im not worried, if any it'll be slow speed on sand and soil.

I was looking to the 302 spring with the 574 extended shock in the front for a 3.5" lift and a 325 spring in the back for 2" lift.

No problem at all. Take a look at this post from the giant Dobinson’s thread. Should have all my part numbers:

https://www.toyota-4runner.org/3672732-post2953.html

Let me know if you have any questions, though Mike from exitoffroad is the expert.
[MENTION=148378]Crikeymike[/MENTION]

 

[lewdog998]

Camping on Tennessee River. Did a little side excursion through a wildlife management area...rainbow falls loop on ON x app. Decent little trail...dropped down hard on tailpipe and bent up into black plastic. Had to bend exhaust tip back down to keep from melting it.