What Did You Do To Your 3rd Gen Today?
- Thread starter pin8246
- Start date
- Status
ugamurph
New member
I ran power from the battery to my new Cobra CB & performed the constant 12v power outlet mod.
Instructions here:
http://www.top4runners.com/ja/12vpower.html
Instructions here:
http://www.top4runners.com/ja/12vpower.html
Skyehunter
New member
Picking up the Lunch Box locker today. Nearly finished rear swing gate bumper last weekend 
arty:
arty:
Con10der_8
New member
Almost finish my roof rack earlier
TRDteen
New member
I ran power from the battery to my new Cobra CB & performed the constant 12v power outlet mod.
Instructions here:
Toyota 4Runner Highlander Electrical Modifications Constant 12v Power
Just did this today. Waiting to get my antenna stud and its gonna be all good to go!
UT Hack
New member
FJ Cruiser Wheels
I got a screamin' deal on some 16" FJ Cruiser wheels. :girl: My buddy down at Discount Tire had a 2010 FJ come in and he pulled all 5 wheels to the side for me. I got all 5 wheels for a total of $267.72... I couldn't believe the deal his boss gave me but I'm certainly not going to complain!
<a href="http://www.flickr.com/photos/hacksays/8350528199/" title="IMG_1024 by HackSays, on Flickr"><img src="http://farm9.staticflickr.com/8090/8350528199_889be0efd8_b.jpg" width="768" height="1024" alt="IMG_1024"></a>
Extremely clean wheels. Only found 1 flaw on them- I'll keep that one for the spare when the time comes to have a tire carrier.
Mounted:
<a href="http://www.flickr.com/photos/hacksays/8350532005/" title="IMG_1027 by HackSays, on Flickr"><img src="http://farm9.staticflickr.com/8230/8350532005_9a4bb009c2_b.jpg" width="1024" height="768" alt="IMG_1027"></a>
<a href="http://www.flickr.com/photos/hacksays/8350532571/" title="IMG_1028 by HackSays, on Flickr"><img src="http://farm9.staticflickr.com/8235/8350532571_b030824215_b.jpg" width="1024" height="768" alt="IMG_1028"></a>
I didn't really know what to expect when I picked them up today, I can honestly say I'm pleasantly surprised with how good they look on my rig. I was thinking about painting my bumpers and wheels black but I'm thinking I'm gonna stick with the chrome now for a while, this looks pretty good in my book!
I got a screamin' deal on some 16" FJ Cruiser wheels. :girl: My buddy down at Discount Tire had a 2010 FJ come in and he pulled all 5 wheels to the side for me. I got all 5 wheels for a total of $267.72... I couldn't believe the deal his boss gave me but I'm certainly not going to complain!
<a href="http://www.flickr.com/photos/hacksays/8350528199/" title="IMG_1024 by HackSays, on Flickr"><img src="http://farm9.staticflickr.com/8090/8350528199_889be0efd8_b.jpg" width="768" height="1024" alt="IMG_1024"></a>
Extremely clean wheels. Only found 1 flaw on them- I'll keep that one for the spare when the time comes to have a tire carrier.
Mounted:
<a href="http://www.flickr.com/photos/hacksays/8350532005/" title="IMG_1027 by HackSays, on Flickr"><img src="http://farm9.staticflickr.com/8230/8350532005_9a4bb009c2_b.jpg" width="1024" height="768" alt="IMG_1027"></a>
<a href="http://www.flickr.com/photos/hacksays/8350532571/" title="IMG_1028 by HackSays, on Flickr"><img src="http://farm9.staticflickr.com/8235/8350532571_b030824215_b.jpg" width="1024" height="768" alt="IMG_1028"></a>
I didn't really know what to expect when I picked them up today, I can honestly say I'm pleasantly surprised with how good they look on my rig. I was thinking about painting my bumpers and wheels black but I'm thinking I'm gonna stick with the chrome now for a while, this looks pretty good in my book!
4Running Daily
New member
Installed my air locker!
I sanded my air deflector for painting and I bought a 5 spoke wheel for 5 wheel rotation.
Updated - This is my first sand/paint on any vehicle. I used 320 grit to get some scratches out, painted it, 320 sanded once more and re-painted it. The paint I used is Rust-Oleum Flat Black.
Updated - This is my first sand/paint on any vehicle. I used 320 grit to get some scratches out, painted it, 320 sanded once more and re-painted it. The paint I used is Rust-Oleum Flat Black.
Last edited:
TRDteen
New member
I hope you put an aftermarket one on...
Kurtis
New member
Right now I am running naked. Tomorrow I am going to pick up a sheet of 3/16" steel plate. I am tired of monkeying around with the stock skid plate. I will be sure to do a write-up in my build.
ICD
New member
Took of the skid plate and boy was that thing dirty because I thought it could the source of my leak (link here http://www.toyota-4runner.org/3rd-gen-t4rs/130692-help-noob-out.html )
All the oild is pretty much gunk and dirt but had some fresh spots in between the layers and my whole under carriage is dry.
In the process I found out that 2 bold are missing (# would be appreciated) and the thread on the bolt or the portion on the support is stripped.
So we shall see what comes of this.
All the oild is pretty much gunk and dirt but had some fresh spots in between the layers and my whole under carriage is dry.
In the process I found out that 2 bold are missing (# would be appreciated) and the thread on the bolt or the portion on the support is stripped.
So we shall see what comes of this.
Imperial4runner
New member
Cleaned my throttle body. Boy was there some carbon...
giguchan
Senior Member
I changed the starter with a little help from my right hand girl!
she's scoping out the work...![a>~original](http://<a href="http://s220.beta.photobucket.com/user/Nascarr97/media/PC301125_zps08bffefb.jpg.html" target="_blank"><img src="http://i220.photobucket.com/albums/dd84/Nascarr97/PC301125_zps08bffefb.jpg" border="0" alt="Photobucket"/></a>~original)
![a>~original](http://<a href="http://s220.beta.photobucket.com/user/Nascarr97/media/PC301127_zps6fc61fc0.jpg.html" target="_blank"><img src="http://i220.photobucket.com/albums/dd84/Nascarr97/PC301127_zps6fc61fc0.jpg" border="0" alt="Photobucket"/></a>~original)
hahahaha she's not afraid to get dirty!! i have a limit though!!!
- Status
Similar threads
